ECOR-1-BSC2-RT/2X21 - Relay base Phoenix Contact

Mã sản phẩm: 1027546

Danh mục: PHOENIX CONTACT, Switch, Measure and Monitor Phoenix Contact,

ECOR-1... relay base, for miniature power relays or miniature switching relays with 1 or 2 changeover contacts, bolt connection, for mounting on NS 35/7,5.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
General	The outputs are not suitable for switching different outer conductors.
General	The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
General	At least a basic level of insulation is maintained against adjacent modules in the DIN rail direction. If the application has higher requirements on the insulation (reinforced insulation), then these must be realized through suitable measures (e.g. partition plates).

Product type	Relay socket
Product family	ESSENTIAL edition
Operating mode	100% operating factor
Insulation characteristics: Air clearances and creepage distances between the power circuits
Overvoltage category	III
Pollution degree	2

Nominal voltage U_N	≤ 230 V AC/DC
Nominal current I_N	10 A
Test voltage relay winding/relay contact	2 kV_rms (50 Hz, 1 min.)
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated surge voltage	4 kV

Input side
Connection method	Bolt connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section rigid (2 conductors with same cross section)	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm² (without ferrule)
Conductor cross section flexible		0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section flexible (2 conductors with same cross section)	0.2 mm² ... 2.5 mm² (without ferrule)
		0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section AWG	14
Tightening torque	0.5 Nm ... 0.7 Nm
Output side
Connection method	Bolt connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section rigid (2 conductors with same cross section)	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm² (without ferrule)
Conductor cross section flexible		0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section flexible (2 conductors with same cross section)	0.2 mm² ... 2.5 mm² (without ferrule)
		0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross section AWG	14
Tightening torque	0.5 Nm ... 0.7 Nm

Width	15.8 mm
Height	71.5 mm
Depth Retaining bracket	58.1 mm (with retaining bracket)

Ambient conditions
Degree of protection	IP20
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-25 °C ... 55 °C
Ambient temperature (storage/transport)	-25 °C ... 85 °C
Altitude	≤ 2000 m