VS-08-DSIV-L180-HYB SCO - Device connector, rear mounting Phoenix Contact

Mã sản phẩm: 1456666

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

Device connector, rear mounting, Ethernet CAT5 (IEC 11801:2002), 8-position, Flush-type female connector, M12, coding: Y - hybrid , PCB mounting, M12 x 1, Solder pins, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) item no.: 1239824

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.

Mounting type	PCB mounting M12 x 1
Connection method	Solder pins

Product type	Circular connectors (device side)
Number of positions	8
Sensor type	Ethernet
Shielded	yes
Coding	Y
Insulation characteristics
Degree of pollution	3

Dimensional drawing
Length of the solder pin	2.3 mm
Length of the solder pin		2.3 mm

Flammability rating according to UL 94	V0
Seal material	EPDM
Contact material	CuZn
Contact surface material	Au
Contact carrier material	PPA
Material for screw connection	Zinc die-cast, nickel-plated

Rated surge voltage	0.8 kV
Contact resistance	≤ 3 mΩ
Insulation resistance	> 100 MΩ
Nominal voltage U_N	48 V AC (Power and data)
Nominal voltage U_N		50 V DC (Power and data)
Nominal current I_N	0.5 A (Data)
Nominal current I_N		6 A (Power)
Transmission characteristics (category)	CAT5 (IEC 11801:2002)