VAL-US 60/O - Type 2 surge protection device Phoenix Contact

Mã sản phẩm: 2906279

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Surge arresters consisting of base element and protective connector with high-capacity varistor, for mounting on NS 35/7.5, 1-channel

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

IEC test classification	II
IEC test classification		T2
EN type	T2
Type	DIN rail module, two-section, divisible
Product type	Surge protection for NEMA power supply units
Product family	VALVETRAB MS
Number of positions	1
Surge protection fault message	optical
Insulation characteristics
Pollution degree	2

Nominal frequency f_N

50 Hz (60 Hz)

Connection method	Screw connection
Screw thread	M5
Tightening torque	3 Nm ... 4.5 Nm (UL)
Tightening torque		27 lb_f-in. ... 40 lb_f-in. (UL)
Stripping length	16 mm
Conductor cross section flexible min.	1.5 mm²
Conductor cross section flexible max.	25 mm²
Conductor cross section, rigid min.	1.5 mm²
Conductor cross section, rigid max.	35 mm²
Conductor cross section AWG	15 ... 2
Conductor cross section AWG		14 ... 2 (UL)
Connection method	Screw connection
Screw thread	M5
Tightening torque	4.5 Nm
Tightening torque		30 lb_f-in. (UL)
Stripping length	16 mm
Conductor cross section flexible min.	1.5 mm²
Conductor cross section flexible max.	25 mm²
Conductor cross section, rigid min.	1.5 mm²
Conductor cross section, rigid max.	35 mm²
Conductor cross section AWG	15 ... 2
Conductor cross section AWG		14 ... 2 (UL)

Dimensional drawing
Width	17.6 mm
Height	77.1 mm
Depth	89.2 mm

Color	black
Flammability rating according to UL 94	V0
Housing material	PBT

Mode of protection	L-PEN
		(L+) - (L-)
		(L-) - PE
		(L+) - PE
Direction of action	L-N / L-PEN
Nominal voltage U_N	60 V DC
Nominal voltage U_N		-48 V DC (RRH)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous voltage U_C	75 V AC
Maximum continuous voltage U_C		100 V DC
Maximum continuous operating voltage U_C(L-N)	75 V AC
Maximum continuous operating voltage U_C(L-N)		100 V DC
Maximum continuous operating voltage U_C (L-PEN)	75 V AC
Maximum continuous operating voltage U_C (L-PEN)		100 V DC
Rated load current I_L	80 A
Residual current I_PE	≤ 0.45 mA
Standby power consumption P_C	≤ 35 mVA
Nominal discharge current I_n (8/20) µs	15 kA
Nominal discharge current I_n (8/20) µs (L-N)	15 kA
Nominal discharge current I_n (8/20) µs (L-PEN)	15 kA
Maximum discharge current I_max (8/20) µs	40 kA
Maximum discharge current I_max (8/20) µs (L-N)	40 kA
Maximum discharge current I_max (8/20) µs (L-PEN)	40 kA
Short-circuit current rating I_SCCR	25 kA
Voltage protection level U_p	≤ 0.55 kV
Voltage protection level U_p (L-N)	≤ 0.55 kV
Voltage protection level U_p (L-PEN)	≤ 0.55 kV
Residual voltage U_res	≤ 0.55 kV (at I_n)
		≤ 0.425 kV (at 10 kA)
		≤ 0.325 kV (at 5 kA)
		≤ 0.275 kV (at 3 kA)
TOV behavior at U_T	100 V AC (5 s / withstand mode)
TOV behavior at U_T (L-N)	100 V AC (5 s / withstand mode)
TOV behavior at U_T (L-PEN)	100 V AC (5 s / withstand mode)
Response time t_A	≤ 25 ns
Response time t_A (L-N)	≤ 25 ns
Response time t_A (L-PEN)	≤ 25 ns
Max. backup fuse with V-type through wiring	80 A AC (gG)
Max. backup fuse with branch wiring	125 A AC (gG)

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Degree of protection		IP20
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	max. 2000 m
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	5g (10 ... 500 Hz / 2.5 h / X, Y, Z)

UL specifications
Maximum continuous operating voltage MCOV	75 V AC
Maximum continuous operating voltage MCOV (L-N)	75 V AC
Maximum continuous operating voltage MCOV (L-G)	75 V AC
Maximum continuous operating voltage MCOV (L+) - (L-)	100 V DC
Maximum continuous operating voltage MCOV (L+/L-) - G	100 V DC
Voltage protection rating VPR	500 V
Voltage protection rating VPR (L-N)	0.5 kV
Voltage protection rating VPR (L+) - (L-)	0.33 kV
Voltage protection rating VPR (L+/L-) -G	0.33 kV
Nominal discharge current I_n	10 kA
Nominal discharge current I_n (L-N)	10 kA
Nominal discharge current I_n (L+) - (L-)	10 kA
Nominal discharge current I_n (L+/L-) - G	10 kA
Mode of protection	L-L
		L-G
		(L+) - (L-)
		(L+) - G
		(L-) - G
Nominal voltage	60 V DC
Power distribution system	Single phase
Measured limiting voltage MLV	630 V
Measured limiting voltage MLV (L-N)	630 V
SPD Type	4CA
UL indicator/remote signaling
AC operating voltage	125 V AC
AC operating current	1 A AC
UL connection data
Tightening torque	30 lb_f-in.
Conductor cross section AWG	14 ... 2