VAL-US 60/O-FM - Type 2 surge protection device Phoenix Contact

Mã sản phẩm: 2906280

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Surge arresters consisting of base element and protective connector with high-capacity varistor, for mounting on NS 35/7.5, 1-channel

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

IEC test classification	II
IEC test classification		T2
EN type	T2
Type	DIN rail module, two-section, divisible
Product type	Surge protection for NEMA power supply units
Product family	VALVETRAB MS
Number of positions	1
Surge protection fault message	Optical, remote indicator contact
Insulation characteristics
Pollution degree	2

Nominal frequency f_N	50 Hz (60 Hz)
Indicator/remote signaling
Connection name	Remote fault indicator contact
Switching function	Changeover contact
Operating voltage	5 V AC ... 250 V AC
		125 V AC (UL)
		125 V DC (200 mA DC)
Operating current	5 mA AC ... 1.5 A
		1 A (UL)
		1 A (30 V DC)

Connection method	Biconnect terminal blocks
Screw thread	M5
Tightening torque	3 Nm ... 4.5 Nm (UL)
Tightening torque		27 lb_f-in. ... 40 lb_f-in. (UL)
Stripping length	16 mm
Conductor cross section flexible min.	1.5 mm²
Conductor cross section flexible max.	25 mm²
Conductor cross section, rigid min.	1.5 mm²
Conductor cross section, rigid max.	35 mm²
Conductor cross section AWG	15 ... 2 (IEC)
Conductor cross section AWG		14 ... 2 (UL)
Connection method	Screw connection
Screw thread	M5
Tightening torque	4.5 Nm
Tightening torque		30 lb_f-in. (UL)
Stripping length	16 mm
Conductor cross section flexible min.	1.5 mm²
Conductor cross section flexible max.	25 mm²
Conductor cross section, rigid min.	1.5 mm²
Conductor cross section, rigid max.	35 mm²
Conductor cross section AWG	15 ... 2
Conductor cross section AWG		14 ... 2 (UL)
Remote fault indicator contact
Connection method	Screw connection
Screw thread	M2
Tightening torque	0.25 Nm
Conductor cross section flexible min.	0.14 mm²
Conductor cross section flexible max.	1.5 mm²
Conductor cross section, rigid min.	0.14 mm²
Conductor cross section, rigid max.	1.5 mm²
Conductor cross section AWG	28 ... 16

Dimensional drawing
Width	17.6 mm
Height	77.1 mm
Depth	89.2 mm

Color	black
Flammability rating according to UL 94	V0
Housing material	PBT

Mode of protection	L-PEN
		(L+) - (L-)
		(L-) - PE
		(L+) - PE
Direction of action	L-N / L-PEN
Nominal voltage U_N	60 V DC
Nominal voltage U_N		-48 V DC (RRH)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous voltage U_C	75 V AC
Maximum continuous voltage U_C		100 V DC
Maximum continuous operating voltage U_C(L-N)	75 V AC
Maximum continuous operating voltage U_C(L-N)		100 V DC
Maximum continuous operating voltage U_C (L-PEN)	75 V AC
Maximum continuous operating voltage U_C (L-PEN)		100 V DC
Rated load current I_L	80 A
Residual current I_PE	≤ 0.45 mA
Standby power consumption P_C	≤ 35 mVA
Nominal discharge current I_n (8/20) µs	15 kA
Nominal discharge current I_n (8/20) µs (L-N)	15 kA
Nominal discharge current I_n (8/20) µs (L-PEN)	15 kA
Maximum discharge current I_max (8/20) µs	40 kA
Maximum discharge current I_max (8/20) µs (L-N)	40 kA
Maximum discharge current I_max (8/20) µs (L-PEN)	40 kA
Short-circuit current rating I_SCCR	25 kA
Voltage protection level U_p	≤ 0.55 kV
Voltage protection level U_p (L-N)	≤ 0.55 kV
Voltage protection level U_p (L-PEN)	≤ 0.55 kV
Residual voltage U_res	≤ 0.55 kV (at I_n)
		≤ 0.425 kV (at 10 kA)
		≤ 0.325 kV (at 5 kA)
		≤ 0.275 kV (at 3 kA)
TOV behavior at U_T	100 V AC (5 s / withstand mode)
TOV behavior at U_T (L-N)	100 V AC (5 s / withstand mode)
TOV behavior at U_T (L-PEN)	100 V AC (5 s / withstand mode)
Response time t_A	≤ 25 ns
Response time t_A (L-N)	≤ 25 ns
Response time t_A (L-PEN)	≤ 25 ns
Max. backup fuse with V-type through wiring	80 A AC (gG)
Max. backup fuse with branch wiring	125 A AC (gG)

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	max. 2000 m
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	5g (10 ... 500 Hz / 2.5 h / X, Y, Z)

UL specifications
Maximum continuous operating voltage MCOV	75 V AC
Maximum continuous operating voltage MCOV (L-N)	75 V AC
Maximum continuous operating voltage MCOV (L-G)	75 V AC
Maximum continuous operating voltage MCOV (L+) - (L-)	100 V DC
Maximum continuous operating voltage MCOV (L+/L-) - G	100 V DC
Voltage protection rating VPR	500 V
Voltage protection rating VPR (L-N)	0.5 kV
Voltage protection rating VPR (L+) - (L-)	0.33 kV
Voltage protection rating VPR (L+/L-) -G	0.33 kV
Nominal discharge current I_n	10 kA
Nominal discharge current I_n (L-N)	10 kA
Nominal discharge current I_n (L+) - (L-)	10 kA
Nominal discharge current I_n (L+/L-) - G	10 kA
Mode of protection	L-L
		L-G
		(L+) - (L-)
		(L+) - G
		(L-) - G
Nominal voltage	60 V DC
Power distribution system	Single phase
Measured limiting voltage MLV	630 V
Measured limiting voltage MLV (L-N)	630 V
SPD Type	4CA
UL indicator/remote signaling
AC operating voltage	125 V AC
AC operating current	1 A AC
UL connection data
Tightening torque	30 lb_f-in.
Conductor cross section AWG	14 ... 2