VAL-US 60/1+1/1U/FM - Type 2 surge arrester Phoenix Contact

Mã sản phẩm: 2909630

Universal varistor-based plug-in surge arrester for 48 - 60 V DC applications with two conductors plus ground, with remote indication contact

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

IEC test classification	II
IEC test classification		T2
EN type	T2
IEC power supply system	TN-S
Type	DIN rail module, two-section, divisible
Product type	Surge protection for NEMA power supply units
Product family	VALVETRAB MS
Surge protection fault message	Optical, remote indicator contact
Insulation characteristics
Pollution degree	2

Nominal frequency f_N	50 Hz (60 Hz)
Indicator/remote signaling
Connection name	Remote fault indicator contact
Switching function	Changeover contact
Operating voltage	5 V AC ... 250 V AC
		125 V AC (UL)
		125 V DC (200 mA DC)
Operating current	5 mA AC ... 1.5 A
		1 A (UL)
		1 A (30 V DC)

Connection method	Screw connection
Screw thread	M5
Tightening torque	2.5 Nm ... 3 Nm
Tightening torque		22 lb_f-in. ... 26.5 lb_f-in. (UL)
Stripping length	16 mm
Conductor cross section flexible min.	1.5 mm²
Conductor cross section flexible max.	25 mm²
Conductor cross section, rigid min.	1.5 mm²
Conductor cross section, rigid max.	35 mm²
Conductor cross section AWG	15 ... 2
Conductor cross section AWG		10 ... 2 (UL)
Remote fault indicator contact
Connection method	Push-in spring connection
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	0.5 mm²
Conductor cross section, rigid min.	0.14 mm²
Conductor cross section, rigid max.	0.5 mm²
Conductor cross section AWG	24 ... 20 (UL)

Color	gray
Flammability rating according to UL 94	V-0
Housing material	PA 6.6
Housing material		PBT

Mode of protection	L-N
Mode of protection		N-PE
Direction of action	L-N & L(N)-PE
Nominal voltage U_N	60 V AC ±10 % (TN-S)
Nominal voltage U_N		-48 V DC ±10 % (RRH)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous voltage U_C	75 V AC
Maximum continuous voltage U_C		100 V DC
Rated load current I_L	80 A
Residual current I_PE	≤ 0.45 mA
Standby power consumption P_C	≤ 35 mVA
Nominal discharge current I_n (8/20) µs	15 kA
Maximum discharge current I_max (8/20) µs	40 kA
Short-circuit current rating I_SCCR	25 kA
Voltage protection level U_p	≤ 0.55 kV
Residual voltage U_res	≤ 0.55 kV (at I_n)
		≤ 0.425 kV (at 10 kA)
		≤ 0.325 kV (at 5 kA)
		≤ 0.275 kV (at 3 kA)
TOV behavior at U_T	100 V AC (5 s / withstand mode)
Response time t_A	≤ 25 ns
Max. backup fuse with V-type through wiring	80 A AC (gG - 16 mm²)
Max. backup fuse with branch wiring	160 A AC (gG)
Additional technical data
Maximum discharge current I_max (8/20) µs	40 kA

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	7.5g (10 ... 500 Hz / 2.5 h / X, Y, Z)

UL specifications
Maximum continuous operating voltage MCOV (L-N)	75 V AC
Maximum continuous operating voltage MCOV (L-N)		100 V DC
Mode of protection	N-G
		L-N
		(L+) - (L-)
		(L+) - G
		(L-) - G
Nominal voltage	60 V DC
Power distribution system	DC
SPD Type	4CA
UL indicator/remote signaling
AC operating voltage	125 V AC
AC operating current	1 A AC
UL connection data
Tightening torque	30 lb_f-in.
Conductor cross section AWG	10 ... 2