VAL-MS-T1/T2 1000DCPV-UD-ST - Type 1/2 surge protection plug Phoenix Contact

Mã sản phẩm: 2801231

Replacement plug for PV arrester combinations from the VAL-MS-T1/T2 1000DC-PV-... product range

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

IEC test classification	PV T1
IEC test classification		PV T2
EN type	T1 / T2
IEC power supply system	DC
Type	Male
Product type	Replacement plug
Product family	VALVETRAB MS
Number of positions	1
Installation location	Interior
Installation location of the disconnect device	Internal
Accessibility	Accessible
SPD failure behavior	OCFM (Open-Circuit Failure Mode)
Surge protection fault message	optical
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Indicator/remote signaling
Max. required back-up fuse	not required

Connection method

pluggable

Color	jet black RAL 9005
Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PA 6.6-FR
Material group	I
Housing material	PA 6.6-FR

Direction of action	(L+)-PE & (L-)-PE & (L+)-(L-)
Standby power consumption P_C	≤ 25 mVA
Nominal discharge current I_n (8/20) µs	15 kA
Maximum discharge current I_max (8/20) µs	40 kA
Impulse discharge current (10/350) µs, charge	2.5 As
Impulse discharge current (10/350) µs, specific energy	6.25 kJ/Ω
Impulse discharge current (10/350) µs, peak value l_imp	5 kA
Voltage protection level U_p	≤ 1.8 kV
Residual voltage U_res	≤ 1.8 kV (at I_n)
		≤ 1.5 kV (at 5 kA)
		≤ 1.7 kV (at 10 kA)
		≤ 1.9 kV (at 20 kA)
		≤ 2.2 kV (at 30 kA)
		≤ 2.4 kV (at 40 kA)
Response time t_A	≤ 25 ns
Protective circuit DC voltage side (DC)
Open circuit voltage U_OCSTC	≤ 487.5 V DC
Maximum discharge current I_max (8/20) µs	40 kA
Response time t_A	≤ 25 ns
Impulse discharge current (10/350) µs, charge	2.5 As
Impulse discharge current (10/350) µs, specific energy	6.25 kJ/Ω
Impulse discharge current (10/350) µs, peak value l_imp	5 kA
Insulation resistance R_iso	> 5 GΩ (at 500 V DC)
Nominal discharge current I_n (8/20) µs	15 kA
Continuous operating current I_CPV	< 20 µA
Maximum continuous operating voltage U_CPV	585 V DC
Short-circuit current rating I_SCPV	2000 A
Residual voltage U_res	≤ 1.8 kV (at I_n)
		≤ 1.5 kV (at 5 kA)
		≤ 1.7 kV (at 10 kA)
		≤ 1.9 kV (at 20 kA)
		≤ 2.2 kV (at 30 kA)
		≤ 2.4 kV (at 40 kA)
Voltage protection level U_p	≤ 1.8 kV
Standby power consumption P_C	≤ 25 mVA

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	60g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	7.5g (5-500 Hz/2.5 h/XYZ)

UL specifications
Maximum continuous operating voltage MCOV (L+) - G	1050 V DC
Nominal discharge current I_n (L+) - G	20 kA
Mode of protection	(L+) - G
Nominal voltage	875 V DC
Power distribution system	Single phase
Measured limiting voltage MLV (L+) - G	1900 V
SPD Type	4CA