VAL-MS-T1/T2 1000DC-PV/2+V-FM - Lightning/surge arrester type 1/2 Phoenix Contact

Mã sản phẩm: 2801161

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Lightning current arrester / surge protective device for 2-pos. isolated and grounded 1,000 V DC PV voltage systems, for DIN rail mounting, 3-pos. base element with remote indication contact, three pluggable temperature-monitored protective elements, status message at each plug.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General
Note	The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area.

IEC test classification	PV I / II
IEC test classification		PV T1 / T2
EN type	T1 / T2
IEC power supply system	DC
Type	DIN rail module, two-section, divisible
Distance between live and grounded parts	8 mm
Product type	PV arrester
Product family	VALVETRAB MS
Installation location	Interior
Installation location of the disconnect device	Internal
Accessibility	Accessible
Connection configuration	Y configuration
SPD failure behavior	OCFM (Open-Circuit Failure Mode)
Surge protection fault message	Optical, remote indicator contact
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Indicator/remote signaling
Connection name	Remote fault indicator contact
Switching function	Changeover contact
Operating voltage	5 V AC ... 250 V AC
Operating voltage		30 V DC
Operating current	5 mA AC ... 1.5 A AC
Operating current		1 A DC

Connection method	Screw connection
Screw thread	M5
Tightening torque	3 Nm (1.5 mm² ... 16 mm²)
Tightening torque		4.5 Nm (25 mm² ... 35 mm²)
Stripping length	16 mm
Conductor cross section flexible	1.5 mm² ... 25 mm²
Conductor cross section rigid	1.5 mm² ... 35 mm²
Conductor cross section AWG	15 ... 2
Connection method	Fork-type cable lug
Conductor cross section flexible	1.5 mm² ... 16 mm²
Remote fault indicator contact
Connection method	Plug-in/screw connection via COMBICON
Screw thread	M2
Tightening torque	0.25 Nm
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section AWG	28 ... 16

Dimensional drawing
Width	53.4 mm
Height	98.7 mm
Depth	65.7 mm (incl. DIN rail 7.5 mm)
Horizontal pitch	3 Div.

Color	jet black RAL 9005
Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PA 6.6-FR
Insulating material		PBT-FR
Material group	I
Housing material	PA 6.6-FR
Housing material		PBT-FR

Mechanical data
Open side panel	No

Mode of protection	(DC+) - (DC-)
Mode of protection		(DC+/DC-) - PE
Direction of action	(L+)-PE & (L-)-PE & (L+)-(L-)
Rated load current I_L	80 A
Residual current I_PE	≤ 20 µA DC
Residual current I_PE		≤ 350 µA AC
Standby power consumption P_C	≤ 25 mVA
Nominal discharge current I_n (8/20) µs	15 kA
Maximum discharge current I_max (8/20) µs	40 kA
Impulse discharge current (10/350) µs, charge	2.5 As
Impulse discharge current (10/350) µs, specific energy	6.25 kJ/Ω
Impulse discharge current (10/350) µs, peak value l_imp	5 kA
Total discharge current I_total(8/20) µs	40 kA
Total discharge current I_total (10/350) µs	5 kA
Voltage protection level U_p	≤ 3.5 kV
Residual voltage U_res	≤ 3.5 kV (at I_n)
		≤ 2.9 kV (at 5 kA)
		≤ 3.2 kV (at 10 kA)
		≤ 3.7 kV (at 20 kA)
		≤ 4.1 kV (at 30 kA)
		≤ 4.6 kV (at 40 kA)
Response time t_A	≤ 25 ns
PV protective circuit
Connection configuration	Y configuration
SPD failure behavior	OCFM (Open-Circuit Failure Mode)
Protective circuit DC voltage side (DC)
Open circuit voltage U_OCSTC	≤ 975 V DC
Maximum discharge current I_max (8/20) µs	40 kA
Response time t_A	≤ 25 ns
Impulse discharge current (10/350) µs, charge	2.5 As
Impulse discharge current (10/350) µs, specific energy	6.25 kJ/Ω
Impulse discharge current (10/350) µs, peak value l_imp	5 kA
Total discharge current I_total(8/20) µs	40 kA
Total discharge current I_total (10/350) µs	5 kA
Insulation resistance R_iso	> 5 GΩ (at 500 V DC)
Nominal discharge current I_n (8/20) µs	15 kA
Rated load current I_L	80 A
Continuous operating current I_CPV	< 20 µA
Maximum continuous operating voltage U_CPV	1170 V DC
Short-circuit current rating I_SCPV	2000 A
Residual voltage U_res	≤ 3.5 kV (at I_n)
		≤ 2.9 kV (at 5 kA)
		≤ 3.2 kV (at 10 kA)
		≤ 3.7 kV (at 20 kA)
		≤ 4.1 kV (at 30 kA)
		≤ 4.6 kV (at 40 kA)
Residual current I_PE	≤ 20 µA DC
Residual current I_PE		≤ 350 µA AC
Voltage protection level U_p	≤ 3.5 kV
Standby power consumption P_C	≤ 25 mVA

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	60g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	7.5g (5-500 Hz/2.5 h/XYZ)

UL specifications
Maximum continuous operating voltage MCOV	1170 V DC
Short-circuit current rating (SCCR)	50 kA
Voltage protection rating VPR	3 kV
Nominal discharge current I_n	10 kA
Mode of protection	(L+) - (L-)
		(L+) - G
		(L-) - G
Nominal voltage	1170 V DC
Power distribution system	DC PV
SPD Type	1CA
UL indicator/remote signaling
AC operating voltage	125 V AC
AC operating current	1 A AC
UL connection data
Tightening torque	30 lb_f-in.
Conductor cross section AWG	14 ... 2