VAL-MS-CN 1000DC-PV/4+V-FM - Type 2 surge protection device Phoenix Contact

Mã sản phẩm: 2907820

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Surge arrester for 1000 V DC isolated voltage systems, DIN rail mounting, 5 pos. base element with remote signaling contact, 5 pos. plug-in temperature-controlled protective plug modules with status message on each plug, used for arresters with three parallel strings/maximum power point trackers (MPPT).

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

IEC test classification	PV II
IEC test classification		PV T2
EN type	T2
Type	DIN rail module, two-section, divisible
Product type	PV arrester
Product family	VALVETRAB MS
Installation location	Interior
Installation location of the disconnect device	Internal
Accessibility	Accessible
SPD failure behavior	OCM
Surge protection fault message	Optical, remote indicator contact
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Indicator/remote signaling
Connection name	Remote fault indicator contact
Switching function	Changeover contact
Operating voltage	125 V AC
Operating voltage		30 V DC
Operating current	3 A AC
Operating current		3 A DC

Screw thread	M5
Tightening torque	4.5 Nm
Stripping length	16 mm
Conductor cross section flexible	1.5 mm² ... 25 mm²
Conductor cross section rigid	1.5 mm² ... 35 mm²
Conductor cross section AWG	15 ... 2
Remote fault indicator contact
Screw thread	M2
Tightening torque	0.25 Nm
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section AWG	28 ... 16

Dimensional drawing
Width	89 mm
Height	98.57 mm
Depth	64.7 mm

Color	jet black RAL 9005
Flammability rating according to UL 94	V-0
CTI value of material	600
Material group	I
Housing material	PA 6.6-FR
Housing material		PBT-FR

Mode of protection	(L+) - (L-)
		(L+) - PE
		(L-) - PE
Direction of action	(L+)-PE & (L-)-PE & (L+)-(L-)
Rated load current I_L	80 A
Residual current I_PE	≤ 250 µA AC
Residual current I_PE		≤ 20 µA DC
Nominal discharge current I_n (8/20) µs	20 kA
Maximum discharge current I_max (8/20) µs	40 kA
Voltage protection level U_p	≤ 3.8 kV
Response time t_A	≤ 25 ns
Protective circuit DC voltage side (DC)
Open circuit voltage U_OCSTC	≤ 970 V DC
Maximum discharge current I_max (8/20) µs	40 kA
Response time t_A	≤ 25 ns
Insulation resistance R_iso	> 5 GΩ (at 500 V DC)
Nominal discharge current I_n (8/20) µs	20 kA
Rated load current I_L	80 A
Maximum continuous operating voltage U_CPV	1170 V DC
Short-circuit current rating I_SCPV	2000 A
Residual current I_PE	≤ 250 µA AC
Residual current I_PE		≤ 20 µA DC
Voltage protection level U_p	≤ 3.8 kV

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 4000 mm
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	(Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	2g (5-500 Hz/2.5 h/XYZ)