VAL-MS 580-ST - Type 2 surge protection plug Phoenix Contact

Mã sản phẩm: 2920434

Type 2 surge protection plug with high-capacity varistor for VAL-MS base element, thermal monitoring, visual fault warning. Design: 580 V AC

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

General
Note	For use in all low-voltage systems between L-PEN. Only for use in IT systems between L-PE if the bodies of the equipment in the low-voltage system are connected to the grounding system of the transformer station. (common grounding of the HV transformer station and the bodies of the LV consumer's installation. R_E = R_A according to IEC 60364-4-442/VDE 0100-442 Figure 44D/example a)

IEC test classification	II
IEC test classification		T2
EN type	T2
IEC power supply system	TN
IEC power supply system		IT
Type	Male
Distance between live and grounded parts	5 mm
Product type	Replacement plug
Product family	VALVETRAB MS
Number of positions	1
Surge protection fault message	optical
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Nominal frequency f_N

50 Hz (60 Hz)

Connection method

pluggable

Color	jet black RAL 9005
Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PA 6.6
Material group	I
Housing material	PA 6.6

Mode of protection	L-PE
Mode of protection		L-PEN
Direction of action	1L-N/PE
Nominal voltage U_N	400/690 V AC (TN)
Nominal voltage U_N		500 V AC (IT)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous voltage U_C	580 V AC
Residual current I_PE	≤ 0.25 mA
Standby power consumption P_C	≤ 150 mVA
Nominal discharge current I_n (8/20) µs	15 kA
Maximum discharge current I_max (8/20) µs	30 kA
Short-circuit current rating I_SCCR	25 kA
Voltage protection level U_p	≤ 2.5 kV
Residual voltage U_res	≤ 2.5 kV (at I_n)
		≤ 2.3 kV (at 10 kA)
		≤ 2.1 kV (at 5 kA)
		≤ 1.9 kV (at 3 kA)
TOV behavior at U_T	690 V AC (5 s / withstand mode)
TOV behavior at U_T		762 V AC (120 min / withstand mode)
Response time t_A	≤ 25 ns
Max. backup fuse with branch wiring	125 A (gG)

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	5g (10 ... 500 Hz / 2.5 h / X, Y, Z)

UL specifications
Maximum continuous operating voltage MCOV (L-N)	580 V AC
Nominal discharge current I_n (L-N)	10 kA
Mode of protection	L-N
Nominal voltage	400 V AC
Power distribution system	Single phase
Nominal frequency	50/60 Hz
Measured limiting voltage MLV (L-N)	2310 V
SPD Type	4CA

Air clearances and creepage distances
Standards/regulations	EN 60664-1 / EN 61643-11
Standards/specifications	IEC 61643-11
Standards/specifications	EN 61643-11