VAL-MS 400/3+0/VF-FM/32 - Type 2 surge arrester Phoenix Contact

Mã sản phẩm: 2909828

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Surge protective device combination, 3-channel, for installation on NS 35/7,5, with remote indication contact (FM) as changeover contact, voltage 400 V AC

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General
Note	Burst test up to 4 kV passed according to DIN EN 61000-4-4.
		Insulates against repetitive pulses up to 1.5 kV.
		Only usable in IT Systems between L-PE, if the exposed-conductive-parts (bodies) of the equipment of the low-voltage installation is connected to the earthing arrangement of the transformer substation (interconnected earthing arrangement of the HV-transformer substation with the bodies of the LV-installation. R_E = R_A accordance to IEC 60364-4-442 / VDE 0100-442 Fig. 44D / Example a).
		At altitudes > 2000 m (amsl), a lateral distance of 2 mm must be maintained between live and grounded parts.

IEC test classification	II
IEC test classification		T2
EN type	T2
IEC power supply system	IT
Type	DIN rail module, two-section, divisible
Product type	Surge arrester
Product family	VALVETRAB MS
Number of positions	4
Surge protection fault message	Optical, remote indicator contact
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Nominal frequency f_N	50 Hz (60 Hz)
Indicator/remote signaling
Connection name	Remote fault indicator contact
Switching function	Changeover contact
Operating voltage	5 V AC ... 250 V AC (Altitude ≤ 2000 m amsl)
		5 V AC ... 150 V AC (Altitude > 2000 m amsl)
		30 V DC
Operating current	5 mA AC ... 750 mA AC
Operating current		1 A DC

Connection method	Screw connection
Screw thread	M5
Tightening torque	3 Nm (1.5 mm² ... 16 mm²)
Tightening torque		4.5 Nm (25 mm² ... 35 mm²)
Stripping length	16 mm
Conductor cross section flexible	1.5 mm² ... 25 mm²
Conductor cross section rigid	1.5 mm² ... 35 mm²
Conductor cross section AWG	15 ... 2
Connection method	Fork-type cable lug
Conductor cross section flexible	1.5 mm² ... 16 mm²
Remote fault indicator contact
Connection method	Plug-in/screw connection via COMBICON
Screw thread	M2
Tightening torque	0.25 Nm
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section AWG	28 ... 16

Dimensional drawing
Width	71 mm
Height	98.7 mm
Depth	65.7 mm (incl. DIN rail 7.5 mm)
Horizontal pitch	4 Div.

Color	jet black RAL 9005
Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PA 6.6/PBT
Material group	I
Housing material	PA 6.6
Housing material		PBT

Mode of protection	L-PE
Mode of protection		L-L
Direction of action	3L-N/PE
Nominal voltage U_N	400 V AC (IT)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous voltage U_C	440 V AC
Rated load current I_L	80 A
Residual current I_PE	≤ 5 µA
Standby power consumption P_C	≤ 600 mVA
Nominal discharge current I_n (8/20) µs	20 kA
Maximum discharge current I_max (8/20) µs	40 kA
Short-circuit current rating I_SCCR	25 kA
Voltage protection level U_p (L-L)	≤ 4 kV
Voltage protection level U_p (L-PE)	≤ 3.5 kV
Residual voltage U_res (L-L)	≤ 4 kV (at I_n)
Residual voltage U_res (L-PE)	≤ 2.3 kV (at I_n)
Response time t_A (L-L)	≤ 25 ns
Response time t_A (L-PE)	≤ 100 ns
Max. backup fuse with V-type through wiring	80 A (gG)
Max. backup fuse with branch wiring	100 A (gG)

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 5000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	5g (10 ... 500 Hz / 2.5 h / X, Y, Z)