VAL-MS 3+V-BE - Surge protection base-element Phoenix Contact

Mã sản phẩm: 2905859

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Base element for surge arresters, for isolated 1000 V DC voltage systems, for DIN rail mounting, 4-pos. base element without remote indication contact, for protecting two parallel strings/MPP trackers.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General
Note	The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area.

IEC test classification	PV T1
IEC test classification		PV T2
EN type	T2
Type	Base element, DIN rail mounting
Distance between live and grounded parts	8 mm
Product type	Base element
Product family	VALVETRAB MB
Number of positions	2
Installation location	Interior
Installation location of the disconnect device	Internal
Accessibility	Accessible
Connection configuration	Y configuration
SPD failure behavior	OCFM (Only in combination with VAL-MS...DC-PV-ST)
Surge protection fault message	none
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Connection method	Screw connection
Screw thread	M5
Tightening torque	3 Nm (1.5 mm² ... 16 mm²)
Tightening torque		4.5 Nm (25 mm² ... 35 mm²)
Stripping length	16 mm
Conductor cross section flexible	1.5 mm² ... 25 mm²
Conductor cross section rigid	1.5 mm² ... 35 mm²
Conductor cross section AWG	15 ... 2
Connection method	Fork-type cable lug
Conductor cross section flexible	1.5 mm² ... 16 mm²

Dimensional drawing
Width	71.2 mm
Height	89.8 mm
Depth	51.5 mm (incl. DIN rail 7.5 mm)
Horizontal pitch	4 Div.

Color	jet black RAL 9005
Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PBT
Material group	I
Housing material	PBT

Mechanical data
Open side panel	No

Mode of protection	(L+) - (L-)
		(L+) - PE
		(L-) - PE
Rated load current I_L	80 A
PV protective circuit
Connection configuration	Y configuration
SPD failure behavior	OCFM (Only in combination with VAL-MS...DC-PV-ST)
Protective circuit DC voltage side (DC)
Rated load current I_L	80 A
Maximum continuous operating voltage U_CPV	1170 V DC

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 3000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	5g (10 ... 500 Hz / 2.5 h / X, Y, Z)