VAL-MS 1500DC-PV/2+V - Type 2 surge arrester Phoenix Contact

Mã sản phẩm: 1033708

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Surge protective device for 2-pos. isolated and grounded 1500 V DC PV systems, for DIN rail mounting, 3-pos. base element, three pluggable temperature-monitored protective elements, status message on each plug.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General
Note	The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area.

IEC test classification	PV II
IEC test classification		PV T2
EN type	T2
IEC power supply system	DC
Type	DIN rail module, two-section, divisible
Distance between live and grounded parts	8 mm
Product type	PV arrester
Product family	VALVETRAB MS
Installation location	Interior
Installation location of the disconnect device	Internal
Accessibility	Accessible
Connection configuration	Y configuration
SPD failure behavior	OCFM (Open-Circuit Failure Mode)
Surge protection fault message	optical
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Connection method	Screw connection
Screw thread	M5
Tightening torque	3 Nm (1.5 mm² ... 16 mm²)
Tightening torque		4.5 Nm (25 mm² ... 35 mm²)
Stripping length	16 mm
Conductor cross section flexible	1.5 mm² ... 25 mm²
Conductor cross section rigid	1.5 mm² ... 35 mm²
Conductor cross section AWG	15 ... 2
Connection method	Fork-type cable lug
Conductor cross section flexible	1.5 mm² ... 16 mm²

Dimensional drawing
Width	53.4 mm
Height	89.8 mm
Depth	65.7 mm
Horizontal pitch	3 Div.

Color	jet black RAL 9005
Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PA 6.6-FR
Insulating material		PBT-FR
Material group	I
Housing material	PA 6.6-FR
Housing material		PBT-FR

Mechanical data
Open side panel	No

Mode of protection	(L+) - (L-)
		(L+) - PE
		(L-) - PE
Direction of action	(L+)-PE & (L-)-PE & (L+)-(L-)
Rated load current I_L	80 A
Residual current I_PE	≤ 350 µA DC
Residual current I_PE		≤ 600 µA AC
Standby power consumption P_C	≤ 250 mVA
Nominal discharge current I_n (8/20) µs	15 kA
Maximum discharge current I_max (8/20) µs	30 kA
Total discharge current I_total(8/20) µs	30 kA
Voltage protection level U_p	≤ 5 kV
Residual voltage U_res	≤ 3.8 kV (at 3 kA)
		≤ 4.1 kV (at 5 kA)
		≤ 4.4 kV (at 10 kA)
		≤ 5 kV (at 15 kA)
		≤ 5.3 kV (at 20 kA)
		≤ 5.7 kV (at 30 kA)
		≤ 6 kV (at 40 kA)
Response time t_A	≤ 25 ns
PV protective circuit
Connection configuration	Y configuration
SPD failure behavior	OCFM (Open-Circuit Failure Mode)
Protective circuit DC voltage side (DC)
Open circuit voltage U_OCSTC	≤ 1250 V DC
Maximum discharge current I_max (8/20) µs	30 kA
Response time t_A	≤ 25 ns
Total discharge current I_total(8/20) µs	30 kA
Nominal discharge current I_n (8/20) µs	15 kA
Rated load current I_L	80 A
Continuous operating current I_CPV	< 350 µA
Maximum continuous operating voltage U_CPV	1500 V DC
Short-circuit current rating I_SCPV	2000 A
Residual voltage U_res	≤ 3.8 kV (at 3 kA)
		≤ 4.1 kV (at 5 kA)
		≤ 4.4 kV (at 10 kA)
		≤ 5 kV (at 15 kA)
		≤ 5.3 kV (at 20 kA)
		≤ 5.7 kV (at 30 kA)
		≤ 6 kV (at 40 kA)
Residual current I_PE	≤ 350 µA DC
Residual current I_PE		≤ 600 µA AC
Voltage protection level U_p	≤ 5 kV
Standby power consumption P_C	≤ 250 mVA
Additional technical data
Maximum discharge current I_max (8/20) µs	40 kA
Nominal discharge current I_n (8/20) µs	20 kA (4x (5x I_n \| 120 s) \| 30 min))

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 3000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	5g (5-500 Hz/2.5 h/XYZ)

UL specifications
Maximum continuous operating voltage MCOV	1500 V DC
Short-circuit current rating (SCCR)	50 kA
Voltage protection rating VPR	4 kV
Nominal discharge current I_n	10 kA
Mode of protection	(DC+) - (DC-)
		(DC+) - G
		(DC-) - G
Nominal voltage	1500 V DC
Power distribution system	DC PV
SPD Type	1CA
UL connection data
Tightening torque	30 lb_f-in.
Conductor cross section AWG	14 ... 2