VAL-MB-T2-1000DC-2+V-R - Type 2 surge arrester Phoenix Contact

Mã sản phẩm: 1376162

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Surge protective device, acc. to type 2/class II, for grounded, unipolar DC supply systems up to 1100 V DC, for DIN rail mounting, with remote indication contact.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

IEC test classification	T2
EN type	T2
IEC power supply system	DC
Type	DIN rail module, one-piece
Product type	Surge arrester
Surge protection fault message	Optical, remote indicator contact
Insulation characteristics
Overvoltage category	III
Pollution degree	2

Indicator/remote signaling
Connection name	Remote fault indicator contact
Switching function	Changeover contact
Operating voltage	5 V AC ... 250 V AC (Altitude ≤ 2000 m amsl)
Operating voltage		5 V DC ... 30 V DC (200 mA DC)
Operating current	5 mA AC ... 1.5 A AC
Operating current		5 mA DC ... 1 A DC

Connection method	Screw connection
Screw thread	M5
Tightening torque	3 Nm
Stripping length	16 mm
Conductor cross section flexible	2.5 mm² ... 35 mm²
Conductor cross section AWG	14 ... 2
Remote fault indicator contact
Connection method	Screw connection
Screw thread	M2
Tightening torque	0.25 Nm
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section AWG	28 ... 16

Dimensional drawing
Width	71.2 mm
Height	120 mm
Depth	65.5 mm (incl. DIN rail 7.5 mm)
Horizontal pitch	4 Div.

Color	traffic grey A RAL 7042
Flammability rating according to UL 94	V-0
CTI value of material	600
Insulating material	PA 6.6
Insulating material		PBT
Housing material	PA 6.6

Mode of protection	(DC+) - (DC-)
Mode of protection		(DC+/DC-) - PE
Direction of action	(L+)-PE & (L-)-PE & (L+)-(L-)
Nominal voltage U_N	1000 V DC
Maximum continuous voltage U_C	1100 V DC
Rated load current I_L	40 A
Residual current I_PE	≤ 100 µA DC
Residual current I_PE		≤ 540 µA AC
Standby power consumption P_C	≤ 150 mVA
Nominal discharge current I_n (8/20) µs	20 kA
Maximum discharge current I_max (8/20) µs	40 kA
Total discharge current I_total(8/20) µs	40 kA
Short-circuit current rating I_SCCR	min. 1 kA DC (with maximum backup fuse 40 A gG/1200 V DC)
Short-circuit current rating I_SCCR		max. 4 kA DC (with maximum backup fuse 40 A gG/1200 V DC)
Voltage protection level U_p	≤ 4.5 kV
Residual voltage U_res	≤ 4.5 kV (at I_n)
		≤ 3.3 kV (at 3 kA)
		≤ 3.6 kV (at 6.25 kA)
		≤ 3.8 kV (at 10 kA)
		≤ 4.2 kV (at 15 kA)
		≤ 5.4 kV (at 40 kA)
Response time t_A	≤ 25 ns
Max. backup fuse with branch wiring	40 A (gG / 1200 V DC)

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 6000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	50g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	5g (5 - 500 Hz/2.5 h/X, Y, Z)