VAL-MB-T1/T2 600DC-PV/2+V - Lightning/surge arrester type 1/2 Phoenix Contact

Mã sản phẩm: 2906293

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Lightning current arrester/surge protective device for 2-pos. isolated and grounded 600 V DC PV systems, for DIN rail mounting, temperature-monitored protective elements, status message on the module.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

IEC test classification	PV I / II
IEC test classification		PV T1 / T2
EN type	T1 / T2
IEC power supply system	DC
Type	DIN rail module, one-piece
Product type	PV arrester
Product family	VALVETRAB MB
Installation location	Interior
Installation location of the disconnect device	Internal
Accessibility	Accessible
Connection configuration	Y configuration
SPD failure behavior	OCFM (Open-Circuit Failure Mode)
Surge protection fault message	optical
Insulation characteristics
Pollution degree	2

Connection method	Screw connection
Screw thread	M5
Tightening torque	3 Nm
Stripping length	16 mm
Conductor cross section flexible	2.5 mm² ... 35 mm²
Conductor cross section AWG	14 ... 2

Dimensional drawing
Width	71.2 mm
Height	120 mm
Depth	65.5 mm
Horizontal pitch	4 Div.

Color	traffic grey A RAL 7042
Flammability rating according to UL 94	V-0
Insulating material	PA 6.6
Insulating material		PBT
Housing material	PA 6.6

Mechanical data
Open side panel	No

Mode of protection	(L+) - (L-)
		(L+) - PE
		(L-) - PE
Direction of action	(L+)-PE & (L-)-PE & (L+)-(L-)
Rated load current I_L	50 A
Residual current I_PE	≤ 45 µA DC
Residual current I_PE		≤ 420 µA AC
Standby power consumption P_C	≤ 36 mVA
Nominal discharge current I_n (8/20) µs	20 kA
Maximum discharge current I_max (8/20) µs	40 kA
Impulse discharge current (10/350) µs, charge	3.125 As
Impulse discharge current (10/350) µs, specific energy	9.77 kJ/Ω
Impulse discharge current (10/350) µs, peak value l_imp	6.25 kA
Total discharge current I_total(8/20) µs	40 kA
Total discharge current I_total (10/350) µs	12.5 kA
Voltage protection level U_p	≤ 2.9 kV
Residual voltage U_res	≤ 2.9 kV (at I_n)
		≤ 2.1 kV (at 3 kA)
		≤ 2.4 kV (at 6.25 kA)
		≤ 2.5 kV (at 10 kA)
		≤ 2.8 kV (at 15 kA)
		≤ 3.6 kV (at 40 kA)
Response time t_A	≤ 25 ns
PV protective circuit
Connection configuration	Y configuration
SPD failure behavior	OCFM (Open-Circuit Failure Mode)
Protective circuit DC voltage side (DC)
Open circuit voltage U_OCSTC	≤ 667 V DC
Maximum discharge current I_max (8/20) µs	40 kA
Response time t_A	≤ 25 ns
Impulse discharge current (10/350) µs, charge	3.125 As
Impulse discharge current (10/350) µs, specific energy	9.77 kJ/Ω
Impulse discharge current (10/350) µs, peak value l_imp	6.25 kA
Total discharge current I_total(8/20) µs	40 kA
Total discharge current I_total (10/350) µs	12.5 kA
Insulation resistance R_iso	> 5 GΩ (at 500 V DC)
Nominal discharge current I_n (8/20) µs	20 kA
Rated load current I_L	50 A
Continuous operating current I_CPV	< 45 µA
Maximum continuous operating voltage U_CPV	800 V DC
Short-circuit current rating I_SCPV	2000 A
Residual voltage U_res	≤ 2.9 kV (at I_n)
		≤ 2.1 kV (at 3 kA)
		≤ 2.4 kV (at 6.25 kA)
		≤ 2.5 kV (at 10 kA)
		≤ 2.8 kV (at 15 kA)
		≤ 3.6 kV (at 40 kA)
Residual current I_PE	≤ 45 µA DC
Residual current I_PE		≤ 420 µA AC
Voltage protection level U_p	≤ 2.9 kV
Standby power consumption P_C	≤ 36 mVA

Ambient conditions
Degree of protection	IP20 (only when all terminal points are used)
Ambient temperature (operation)	-40 °C ... 80 °C
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 6000 m (amsl)
Permissible humidity (operation)	5 % ... 95 %
Shock (operation)	50g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)	5g (5 - 500 Hz/2.5 h/X, Y, Z)