UMK-32 RM/MR-G24/1/YCS - Active module Phoenix Contact

Mã sản phẩm: 2969055

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

32-channel output relay module (one N/O contact, 250 V AC/3 A) with a screw connection. The module is controlled through a 50-pos. system connector and is suitable for the Yokogawa ADV 551 and ADV 561 cards.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	Observe the maximum switching capacity of the relays used
General	Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch.
General	The outputs are not suitable for switching different line conductors. The sum of the switching voltages used for adjacent outputs must not exceed the rated insulation voltage value
General	The necessary requirements for insulation (basic insulation or reinforced insulation) from adjacent modules (in DIN-rail direction) must be realized by applying suitable measures (e. g., partition plates).

Product type	Interface module
No. of channels	32
Compatible components	Miniature relay, REL-MR-G 24/1
With components	yes
Insulation characteristics
Overvoltage category	II
Pollution degree	2

No. of channels	32
Rated insulation voltage	300 V AC
Rated surge voltage	4 kV (Basic insulation)
Supported controller YOKOGAWA CS3000 CentumVP
Suitable I/O card	ADV551
Suitable I/O card		ADV561
Supported controller YOKOGAWA STARDOM
Suitable I/O card	NFDV551
Suitable I/O card		NFDV561

Nominal input voltage U_N	24 V DC
Input voltage range in reference to U_N	0.9 ... 1.1
Input voltage range	21.6 V DC ... 26.4 V DC
Typical input current at U_N	6.5 mA (per channel)
Protective circuit	Free running; Freewheeling diode
Protective circuit		Reverse polarity protection; Polarity protection diode
Operating voltage display	Green LED
Status display/channel	Yellow LED

Compatible components	Miniature relay, REL-MR-G 24/1
Switching
Contact type	1 N/O contact
Maximum switching voltage	250 V AC
Maximum switching voltage		125 V DC
Minimum switching voltage	5 V AC/DC
Limiting continuous current	3 A
Maximum inrush current	2 A (Supply, (P1+, P2+), pluggable fuse (IEC 127-2, 5X20, 2A))
Min. switching current	1 mA
Interrupting rating (ohmic load) max.	72 W (at 24 V DC)
		60 W (at 48 V DC)
		50 W (at 60 V DC)
		50 W (at 110 V DC)
		750 VA (for 250 V AC)
Error detection (line break / short-circuit)	no

Field level
Connection method	Screw connection
Number of connections	72
Number of positions	3
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
Conductor cross section AWG	26 ... 14
Controller level
Connection method	Yokogawa KS-compatible
Number of connections	1
Number of positions	50
Note	Usable system cables: Phoenix Contact YUC50, Yokogawa AKB331
Tightening torque	0.5 Nm