UMK-32 RM/MR-G24/1/PLC - Active module Phoenix Contact

Mã sản phẩm: 2979472

VARIOFACE output module, with 32 miniature relays, 1 N/O contact each, plugged, for 24 V DC (incl. relay)

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

General	Observe the maximum switching capacity of the relays used
General	Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch.
General	The outputs are not suitable for switching different line conductors. The sum of the switching voltages used for adjacent outputs must not exceed the rated insulation voltage value
General	The necessary requirements for insulation (basic insulation or reinforced insulation) from adjacent modules (in DIN-rail direction) must be realized by applying suitable measures (e. g., partition plates).

Product type	Interface module
No. of channels	32
Operating mode	100% operating factor
Mechanical service life	2x 10⁷ cycles
Compatible components	Miniature relay, REL-MR-G 24/1
With components	yes
Insulation characteristics
Overvoltage category	III
Pollution degree	2

No. of channels	32
Rated insulation voltage	300 V AC
Rated surge voltage	4 kV (Basic insulation)
Supported controller SIEMENS S7-1500
Suitable I/O card	6ES7521-1BL00-0AB0
		6ES7522-1BL00-0AB0
		6ES7522-1BL01-0AB0
Supported controller SIEMENS S7-400
Suitable I/O card	6ES7422-1BL00-0AA0
Suitable I/O card		6ES7422-7BL00-0AB0
Supported controller ALLEN-BRADLEY PLC 5
Suitable I/O card	1771 OBN
Supported controller EMERSON DeltaV
Suitable I/O card	VE4002S1T2B6
Supported controller GE-FANUC RX3i
Suitable I/O card	IC694MDL754
Supported controller HONEYWELL Experion PKS C200
Suitable I/O card	TC-ODD 321
Supported controller MITSUBISHI MELSEC L
Suitable I/O card	LY41PT1P
Suitable I/O card		LY42PT1P
Supported controller MITSUBISHI MELSEC Q
Suitable I/O card	QY81P
Suitable I/O card		QY82P
Supported controller SCHNEIDER ELECTRIC Modicon TSX QUANTUM
Suitable I/O card	DDO 353
Supported controller SIEMENS S7-300 / ET 200 M
Suitable I/O card	6ES7322-1BL00-0AA0
Supported controller SIEMENS ET 200SP HA
Suitable terminal block	6DL1193-6TP00-0BH1
		6DL1193-6TP00-0DH1
		6DL1193-6TP00-0BM1
		6DL1193-6TP00-0DM1
Suitable I/O module	6DL1131-6BL00-0PH1 (Terminal Block H1/M1)
Suitable I/O module		6DL1132-6BL00-0PH1 (Terminal Block H1/M1)

Nominal input voltage U_N	24 V DC
Input voltage range in reference to U_N	0.8 ... 1.1
Input voltage range	19.2 V DC ... 26.4 V DC
Typical input current at U_N	6.5 mA
Typical response time	5 ms
Typical release time	15 ms
Protective circuit	Freewheeling diode; Freewheeling diode
Protective circuit		Reverse polarity protection; Polarity protection diode
Operating voltage display	Green LED
Status display/channel	Yellow LED

Compatible components	Miniature relay, REL-MR-G 24/1
Switching
Contact type	1 N/O contact
Type of switch contact	Double contact
Contact material	AgNi, 5 µm hard gold-plated
Maximum switching voltage	250 V AC
Maximum switching voltage		125 V DC
Minimum switching voltage	5 V
Limiting continuous current	3 A
Maximum inrush current	5 A
Min. switching current	1 mA
Interrupting rating (ohmic load) max.	72 W (24 V DC)
		60 W (48 V DC)
		50 W (60 V DC)
		50 W (110 V DC)
		750 VA (250 V AC)
Error detection (line break / short-circuit)	no

Controller level
Connection method	IDC/FLK pin strip
Number of connections	1
Number of positions	50
Pitch	2.54 mm
Field level
Connection method	Screw connection
Stripping length	6 mm
Screw thread	M3
Number of connections	64
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
Conductor cross section AWG	26 ... 16
Supply
Connection method	Screw connection
Stripping length	6 mm
Screw thread	M3
Number of connections	4
Number of positions	2
Conductor cross section rigid	0.14 mm² ... 1.5 mm²
Conductor cross section flexible	0.14 mm² ... 1.5 mm²
Conductor cross section AWG	26 ... 14