UM-2KS50/32R/SI/J/DO24V/YCS - Active module Phoenix Contact

Mã sản phẩm: 2908399

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

32-channel, 24 V DC output relay module with screw connection and redundant, 50-pos. system connection, fuse and jumper in every output circuit, for Yokogawa ADV551 and ADV561

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	Do not connect adjacent channels to SELV/PELV and FELV.
General	No additional touch protection is required when using a SELV/PELV voltage (≤ 25 V AC or 60 V DC).
General	At least one functional insulation against adjacent modules is complied with (in the support rail direction). If the application has stricter requirements for the insulation (basic insulation or reinforced insulation), they must be realized by applying suitable measures (e. g. partition plates).
General	Do not use for isolation

Product type	Interface module
Operating mode	100% operating factor
Mechanical service life	2x 10⁷ cycles
Insulation characteristics: Air clearances and creepage distances, input/output
Overvoltage category	III
Pollution degree	2
Insulation characteristics: Air and creepage distances, output/output
Insulation	Basic insulation
Overvoltage category	II
Pollution degree	2

Air clearances and creepage distances, input/output
Rated insulation voltage	300 V
Rated surge voltage	6 kV (Reinforced insulation)
Air and creepage distances, output/output
Rated insulation voltage	300 V
Rated surge voltage	2.5 kV
Supported controller YOKOGAWA CENTUM VP
Suitable I/O card	ADV551
		ADV561
		NFDV551
		NFDV561

Nominal input voltage U_N	24 V DC
Input voltage range in reference to U_N	0.8 ... 1.2
Input voltage range	19.2 V DC ... 28.8 V DC
Typical input current at U_N	7 mA
Typical response time	5 ms
Typical release time	6 ms
Protective circuit	Freewheeling diode; Freewheeling diode
Status display/channel	green LED

Switching
Contact type	1 N/O contact
Type of switch contact	Single contact
Contact material	AgSnO
Maximum switching voltage	24 V DC
Minimum switching voltage	5 V (100 mA)
Limiting continuous current	1.5 A (32 °C)
		1 A (45 °C)
		0.5 A (50 °C)
Max. total current of voltage supply	10 A (50 °C)
Min. switching current	1 mA (24 V)
Interrupting rating (ohmic load) max.	48 W (24 V DC)

Controller level
Connection method	Yokogawa KS-compatible
Number of connections	2
Number of positions	50
Field level
Connection method	Screw connection
Number of connections	32
Number of positions	2
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12
Supply
Connection method	Screw connection
Number of connections	4
Number of positions	2
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12

Status display present

Yes

Dimensional drawing
Width	217.5 mm
Height	127.5 mm
Depth	60.5 mm

Ambient conditions
Degree of protection	IP00
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-20 °C ... 50 °C
Ambient temperature (storage/transport)	-20 °C ... 80 °C
Permissible humidity (operation)	10 % ... 95 % (non-condensing)

Air clearances and creepage distances, input/output
Standards/regulations	EN IEC 61010-2-201
Air and creepage distances, output/output
Standards/regulations	EN IEC 61010-2-201