UM-2KS40/16AI-J/SI/RS/SO225 - Input module Phoenix Contact

Mã sản phẩm: 2905003

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

16-channel analog input module with screw connection, redundant voltage supply, and additional jumpers for each channel. Suitable for Yokogawa SAI 143 card.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	No additional touch protection is required when using a SELV/PELV voltage (≤ 25 V AC or 60 V DC).
General	At least one functional insulation against adjacent modules is complied with (in the support rail direction). If the application has stricter requirements for the insulation (basic insulation or reinforced insulation), they must be realized by applying suitable measures (e. g. partition plates).

Product type	Interface module
No. of channels	16
Operating mode	100% operating factor
Insulation characteristics
Insulation	Functional insulation
Insulation characteristics: Air clearances and creepage distances
Insulation	Functional insulation
Overvoltage category	II
Pollution degree	2

No. of channels	16
Max. permissible current	0.9 A (per path, protected by slow-blow fuse 1 A, 5x20 (short-circuit protection only))
Max. permissible total current	10 A (protected by slow-blow fuse 10 A, 5x20 (short-circuit protection only))
Nominal voltage U_N	24 V DC
Nominal voltage U_N		19.2 V DC ... 30 V DC
Air clearances and creepage distances
Rated insulation voltage	50 V
Rated surge voltage	0.5 kV
Supported controller YOKOGAWA ProSafe-RS
Suitable I/O card	SAI143

Alarm contact
Contact type	1 N/O contact
Type of switch contact	Double contact
Contact material	AgNi, 5 µm hard gold-plated
Maximum switching voltage	25 V AC
Maximum switching voltage		48 V DC
Limiting continuous current	1 A
Min. switching current	1 mA
Interrupting rating (ohmic load) max.	24 W (24 V DC)
		48 W (48 V DC)
		25 VA (25 V AC)

Field level
Connection method	Screw connection
Number of connections	1
Number of positions	66
Conductor cross section rigid	0.2 mm² ... 4 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12
Controller level
Connection method	Yokogawa KS-compatible
Number of connections	2
Number of positions	40
Tightening torque	0.5 Nm
Supply
Connection method	Screw connection
Number of connections	1
Number of positions	6
Conductor cross section rigid	0.34 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 12

Status display	LED red
Status display present	Yes, if the fuse fails
Operating voltage display	Green LED

Dimensional drawing
Width	181.5 mm
Height	127.5 mm
Depth	95 mm

Ambient conditions
Degree of protection	IP00
Degree of protection (Installation location)	≥ IP54 (Installation location)
Ambient temperature (operation)	-20 °C ... 55 °C
Altitude	≤ 2000 m