TW 95/ 1-CL - Panel feed-through terminal block Phoenix Contact

Mã sản phẩm: 1708752

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 4,

Panel feed-through terminal block, connection method: T-LOX knee lever connection, Cable lug connection, number of positions: 1, load current: 232 A, connection direction of the conductor to plug-in direction: 0 °, width: 45 mm

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Panel feed-through terminal block
Product family	TW 95/.. -CL
Number of positions	1
Pitch	25 mm
Number of connections	2
Number of rows	1
Number of potentials	1
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Nominal current I_N	232 A
Nominal voltage U_N	1000 V
Degree of pollution	3
Rated voltage (III/3)	1000 V
Rated surge voltage (III/3)	8 kV
Rated voltage (III/2)	1000 V
Rated surge voltage (III/2)	8 kV
Rated voltage (II/2)	1000 V
Rated surge voltage (II/2)	6 kV

Connection technology
Connector system	TW 95
Nominal cross section	95 mm²
Conductor connection exterior
Connection method	T-LOX knee lever connection
Connection direction of the conductor to plug-in direction	0 °
Single-conductor/terminal point multi-stranded	25 mm² ... 95 mm²
Conductor cross section flexible	25 mm² ... 95 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	25 mm² ... 95 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	25 mm² ... 95 mm²
Stripping length	25 mm
Conductor connection interior
Connection method	Cable lug connection
Connection direction of the conductor to plug-in direction	0 °

Plate thickness

1 mm ... 5 mm

Material data - contact
Note	WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material	Cu alloy
Surface characteristics	tin-plated
Material data - housing
Color (Housing)	gray (7042)
Insulating material	PA
Insulating material group	I
CTI according to IEC 60112	600
Flammability rating according to UL 94	V0
Glow wire flammability index GWFI according to EN 60695-2-12	850
Glow wire ignition temperature GWIT according to EN 60695-2-13	775
Temperature for the ball pressure test according to EN 60695-10-2	125 °C
Material data – actuating element
Color ()	()

Safety note
Safety note	• Only electrically qualified personnel may install and operate the product. To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering.
		• Observe the technical data provided here and refer to the documents listed under “Downloads”. The download area contains important information, such as installation notes, technical drawings, and 3D data.
		• The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection.

Dimensional drawing
Pitch	25 mm
Width [w]	45 mm
Height [h]	81.8 mm
Length [l]	120.05 mm
External dimensions
Height [h1]	75.75 mm
Length [l1]	52.9 mm
Internal dimensions
Height [h2]	65.6 mm
Length [l2]	67.15 mm

Test for conductor damage and slackening
Specification	IEC 60947-7-1:2009-04
Result	Test passed
Pull-out test
Specification	IEC 60947-7-1:2009-04
Conductor cross section/conductor type/tractive force setpoint/actual value	25 mm² / solid / > 135 N
		25 mm² / flexible / > 135 N
		95 mm² / solid / > 351 N
		95 mm² / flexible / > 351 N
		25 mm² / flexible with ferrule / > 135 N
		95 mm² / flexible with ferrule / > 351 N

Temperature-rise test
Specification	IEC 60947-7-1:2009-04 (following)
Requirement temperature-rise test	Increase in temperature ≤ 45 K
Short-time withstand current
Specification	IEC 60947-7-1:2009-04
Air clearances and creepage distances \| 1. Insulation coordination
Specification	IEC 60947-1:2007-06 + A1:2010-12
Insulating material group	I
Comparative tracking index (IEC 60112)	CTI 600
Rated insulation voltage (III/3)	1000 V
Rated surge voltage (III/3)	8 kV
minimum clearance value - non-homogenous field (III/3)	8 mm
minimum creepage distance (III/3)	12.5 mm
Rated insulation voltage (III/2)	1000 V
Rated surge voltage (III/2)	8 kV
minimum clearance value - non-homogenous field (III/2)	8 mm
minimum creepage distance (III/2)	8 mm
Rated insulation voltage (II/2)	1000 V
Rated surge voltage (II/2)	6 kV
minimum clearance value - non-homogenous field (II/2)	5.5 mm
minimum creepage distance (II/2)	5.5 mm

Vibration test
Specification	IEC 60068-2-6:2007-12
Frequency	10 - 150 - 10 Hz
Sweep speed	1 octave/min
Amplitude	0.35 mm (10 Hz ... 60.1 Hz)
Sweep speed	5g (60.1 Hz ... 150 Hz)
Test duration per axis	2.5 h
Glow-wire test
Specification	IEC 60695-2-11:2014-02
Temperature	960 °C
Time of exposure	30 s
Ambient conditions
Ambient temperature (operation)	-40 °C ... 100 °C (Depending on the current carrying capacity/derating curve)
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Relative humidity (storage/transport)	30 % ... 70 %
Ambient temperature (assembly)	-5 °C ... 100 °C