TRIO-PS-2G/1500DC/24DC/1.5 - Power supply unit Phoenix Contact

Mã sản phẩm: 1107892

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Primary-switched TRIO POWER DC/DC converter with Push-in connection for DIN rail mounting, input: 1,500 V DC, output: 24 V DC / 1.5 A

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

DC operation
Nominal input voltage range	500 V DC ... 1500 V DC
Input voltage range	450 V DC ... 1650 V DC
Wide-range input	no
Input voltage range DC	600 V DC ... 1500 V DC -15 % ... +10 %
Electric strength, max.	≤ 1800 V DC 1 s
Typical national grid voltage	500 V DC
Typical national grid voltage		1500 V DC
Voltage type of supply voltage	DC
Inrush current integral (I²t)	typ. 0.15 A²s
Current consumption	typ. 85 mA (450 V DC)
Current consumption		typ. 30 mA (1500 V DC)
Recommended breaker for input protection	2 A (1500 V DC)

Efficiency	typ. 88 % (500 V DC)
		typ. 87 % (900 V DC)
		typ. 83 % (1500 V DC)
Nominal output voltage	24 V DC ±3 %
Nominal output current (I_N)	1.5 A
Derating	> 60 °C ... 70 °C (2.5%/K)
Feedback voltage resistance	≤ 35 V DC
Protection against overvoltage at the output (OVP)	≤ 30 V DC
Control deviation	< 1 % (change in load, static 10 % ... 90 %)
		< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)
		< 0.1 % (change in input voltage ±10 %)
Residual ripple	< 40 mV_PP (Ripple)
Residual ripple		< 50 mV_PP (Noise)
Short-circuit-proof	yes
No-load proof	yes
Output power	36 W
Maximum no-load power dissipation	< 1.1 W (500 V DC)
		< 1.4 W (900 V DC)
		< 2.4 W (1500 V DC)
Power loss nominal load max.	< 4.2 W (500 V DC)
		< 5.5 W (900 V DC)
		< 7.5 W (1500 V DC)
Rise time	≤ 30 ms (U_OUT (10 % ... 90 %))
Connection in parallel	yes, for redundancy and increased capacity
Connection in series	No

Input
Connection method	Push-in connection
Conductor cross section, rigid min.	1 mm²
Conductor cross section, rigid max.	4 mm²
Conductor cross section flexible min.	1 mm²
Conductor cross section flexible max.	2.5 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.	1 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.	2.5 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.	1 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.	2.5 mm²
Conductor cross section AWG min.	18
Conductor cross section AWG max.	12
Stripping length	10 mm
Output
Connection method	Push-in connection
Conductor cross section, rigid min.	1 mm²
Conductor cross section, rigid max.	4 mm²
Conductor cross section flexible min.	1 mm²
Conductor cross section flexible max.	2.5 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.	1 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.	2.5 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.	1 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.	2.5 mm²
Conductor cross section AWG min.	18
Conductor cross section AWG max.	12
Stripping length	10 mm

Types of signaling	LED
Signal output: LED status indicator
Signalization designation	DC OK
Status display	"DC OK" LED green
Note on status display	U_OUT > 21.5 V: LED lights up
Color	green
DC OK	U_OUT > 0.9 x U_N (U_N = 24 V DC)

Number of phases	1.00
Insulation voltage input/output	4.2 kV DC (type test)
Insulation voltage input/output		2.6 kV DC (routine test)

Product type	DC/DC converters
Product family	TRIO POWER
MTBF (IEC 61709, SN 29500)	> 3300000 h (25 °C)
		> 1760000 h (40 °C)
		> 740000 h (60 °C)
Insulation characteristics
Protection class	II
Degree of pollution	2

Dimensional drawing
Width	48 mm
Height	130 mm
Depth Device depth (DIN rail mounting)	115 mm (Device depth (DIN rail mounting))
Installation dimensions
Installation distance right/left	0 mm / 0 mm
Installation distance top/bottom	50 mm / 50 mm

Mounting type	DIN rail mounting
Assembly instructions	alignable: horizontally 0 mm (≤ 40 °C) 10 mm (≤ 70 °C), vertically 50 mm
Mounting position	horizontal DIN rail NS 35, EN 60715
With protective coating	No

Flammability rating according to UL 94 (housing / terminal blocks)	V0
Housing material	Plastic
Type of housing	Polycarbonate

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 4000 m (> 2000 m, Derating: 10 %/1000 m)
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Shock	11 ms, 15 g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)	< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
Vibration (operation)		15 Hz ... 150 Hz, 2.3g, 90 min.

Standard - Electrical safety	EN 62109-1:2011
Standard – Safety extra-low voltage	IEC 62109-1:2011 (SELV)
Standard - Safe isolation	DIN VDE 0100-410
Overvoltage category
IEC 62109-1	II

UL approvals	UL 62109-1:2014
UL approvals		UL 1741

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Noise immunity	EN 61000-6-2:2005
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Conducted noise emission	EN 55016
Conducted noise emission		EN 61000-6-4 (Class A)
Noise emission	EN 55016
Noise emission		EN 61000-6-4 (Class A)
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	4 kV (Test Level 2)
Discharge in air	8 kV (Test Level 3)
Comments	Criterion A
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 1 GHz
Test field strength	10 V/m (> Test intensity 3)
Frequency range	1 GHz ... 2.7 GHz
Test field strength	10 V/m (Test Level 2)
Frequency range	2.7 GHz ... 6 GHz
Test field strength	3 V/m (Test Level 1)
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	4 kV (Test Level 4 - asymmetrical)
Output	4 kV (Test Level 4 - asymmetrical)
Comments	Criterion A
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Input	3 kV (Test intensity >4 - symmetrical)
Input		4 kV (Test Level 4 - asymmetrical)
Output	0.5 kV (Test Level 2 - symmetrical)
Output		1 kV (Test Level 2 - asymmetrical)
Comments	Criterion A
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Input/Output	asymmetrical
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V (Test Level 3)
Voltage dips
Standards/regulations	EN 61000-4-11
Emitted interference
Standards/regulations	EN 61000-6-4
Radio interference voltage in acc. with EN 55011	EN 55011 (EN 55022) Class A industrial area of application
Emitted radio interference in acc. with EN 55011	EN 55011 (EN 55022) Class A industrial area of application
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.