TC MOBILE I/O X200-4G - SMS relay Phoenix Contact

Mã sản phẩm: 1038567

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

SMS relay and signaling module, European version, monitor analog and digital values via cellular network, switch relay outputs remotely, communication via SMS or cellular network data connection (e-mail transmission, app), supply voltage 10 V ... 60 V DC

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Signaling system
Application	I/O
MTTF	674 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		324 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		130 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)

Mains type	Cellular communication
Supply
Supply voltage range	10 V DC ... 60 V DC
Typical current consumption	50 mA (24 V DC)
Max. current consumption	80 mA

Digital
Description of the input	Digital input
Number of inputs	4
Switching threshold "0" signal in reference to U_N	≤ 0.3
Switching threshold "1" signal in reference to U_N	≥ 0.7
Analog
Description of the input	Analog input
Number of inputs	2
Input signal	Current or voltage
Resolution	15 bit
Input impedance	600 kΩ (Voltage inputs)
Input impedance		50 Ω (Current inputs)
Voltage input signal	0 V DC ... 60 V DC
Current input signal	0 mA ... 20 mA
Current input signal		4 mA ... 20 mA (configurable)
Precision	± 0.1 %

Switching
Output name	Relay output
Number of outputs	4
Contact type	N/O contact
Minimum switching voltage	100 mV
Maximum switching voltage	60 V DC
Maximum switching voltage		30 V AC
Limiting continuous current	6 A
Switching capacity	100 W (Power Source PS2, P_out ≤100 W)
Electrical service life	30000 cycles

Supply
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 2.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 2.5 mm²
Conductor cross section, flexible	0.20 mm² ... 2.50 mm²
Conductor cross section, rigid	0.20 mm² ... 2.50 mm²
Conductor cross section AWG	24 ... 14
Stripping length	6.5 mm
Tightening torque	0.5 Nm ... 0.6 Nm (5-7 lbs-in, screw terminal blocks)

Data: USB 2.0
Connection method	Mini-USB type B, 5-pos.
Transmission length	≤ 3 m (only for configuration and diagnostics)
Wireless
Interface description	GSM / GPRS / EDGE / LTE (FDD)
Frequency range	800 MHz (LTE B20)
		1800 MHz (LTE B3)
		2600 MHz (LTE B7)
		900 MHz (2 W (EGSM))
		1800 MHz (1 W (EGSM))
GPRS	Multislot Class 33
EDGE	Multislot Class 33
LTE	CAT1

Width	72 mm
Height	90 mm
Depth	62 mm

Material Housing

Polycarbonate

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (SMS mode only, note the derating information in the technical documentation for data connection)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	2000 m
Permissible humidity (operation)	0 % ... 95 %

CE
Certificate	CE-compliant
Wireless approval, Europe
Note	RED 2014/53/EU
UKCA
Certificate	UKCA-compliant

Electromagnetic compatibility	Conformance with RED Directive 2014/53/EU
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	± 6 kV
Discharge in air	± 8 kV
Indirect discharge	± 6 kV
Comments	Criterion B
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	26 MHz ... 6 GHz
Field intensity	10 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	± 2 kV (Unshielded supply line)
Signal	± 2 kV (Shielded signal line)
Signal		± 2 kV (Analog I/O cables, unshielded)
Comments	Criterion B
Surge current load (surge)
Standards/regulations	EN 61000-4-5
Surge current load (surge)
Input	± 0.5 kV (Symmetrical, unshielded supply line)
Input		± 0.5 kV (Asymmetrical, unshielded supply line)
Signal	± 1 kV (Data line, asymmetrical)
Comments	Criterion B
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V
Emitted interference
Emitted radio interference in acc. with EN 55011	Class B, area of application: Industry and residential
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.