SUBCON-PLUS-PROFIB/AX/SC - D-SUB bus connector Phoenix Contact

Mã sản phẩm: 2744380

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

D-SUB connector, 9-pos., male connector, axial version with two cable entries, bus system: PROFIBUS DP up to 12 Mbps, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Product type	Data plug
MTTF	6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		1817 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		155 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Pin assignment	3, 5, 6, 8

Maximum power dissipation for nominal condition	0.025 W
Nominal voltage U_N	5 V
Nominal current I_N	100 mA
Transmission medium	Copper

D-SUB connection
Connection method	D-SUB connector
PCB connection
Connection method	Screw connection
Stripping length	5 mm
Conductor cross section, rigid min.	0.14 mm²
Conductor cross section, rigid max.	1.5 mm²
Conductor cross section flexible min.	0.14 mm²
Conductor cross section flexible max.	1 mm²
Single-wire/terminal point, rigid AWG min.	26
Single-wire/terminal point, rigid AWG max.	16
Min. AWG conductor cross section, flexible	26
Max. AWG conductor cross section, flexible	18

Bus system	PROFIBUS DP
Signal	PROFIBUS

Dimensional drawing
Width	17 mm
Height	31.5 mm
Length	58.2 mm

Material Housing

ABS, metal-plated

External cable diameter

7.6 mm ... 8.4 mm (Incoming bus line)

Mechanical data
Insertion/withdrawal cycles	> 200

Ambient conditions
Degree of protection	IP40
Ambient temperature (operation)	-20 °C ... 75 °C
Ambient temperature (storage/transport)	-25 °C ... 80 °C
Altitude	≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)

EAC
Identification	EAC
ATEX
Identification	 II 3 G Ex nA IIC T4 Gc X
Note	Please follow the special installation instructions in the documentation!
Corrosive gas test
Identification	ISA-S71.04-1985 G3 Harsh Group A