SUBCON-PLUS-M/AX 9 - D-SUB bus connector Phoenix Contact

Mã sản phẩm: 2904467

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

D-SUB plug, 9-pos., pin, axial design with two cable entries, universal type for all systems, pin assignment: 1, 2, 3, 4, 5, 6, 7, 8, 9 to screw connection terminal block

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Product type	Data plug
MTTF	6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		1817 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		155 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Pin assignment	1, 2, 3, 4, 5, 6, 7, 8, 9

Nominal voltage U_N	50 V DC
Nominal current I_N	100 mA

D-SUB connection
Connection method	D-SUB socket
PCB connection
Connection method	Screw connection
Stripping length	4.5 mm
Conductor cross section, rigid min.	0.14 mm²
Conductor cross section, rigid max.	0.5 mm²
Conductor cross section flexible min.	0.14 mm²
Conductor cross section flexible max.	0.5 mm²
Single-wire/terminal point, rigid AWG min.	26
Single-wire/terminal point, rigid AWG max.	20
Min. AWG conductor cross section, flexible	26
Max. AWG conductor cross section, flexible	20

Bus system	Universal type for all systems
Signal	RS-232
		RS-422
		RS-485

Dimensional drawing
Width	17 mm
Height	31.5 mm
Length	58.2 mm

Material Housing

ABS, metal-plated

External cable diameter

7.6 mm ... 8.4 mm (Incoming bus line)

Mechanical data
Insertion/withdrawal cycles	> 200

Ambient conditions
Degree of protection	IP30
Ambient temperature (operation)	-20 °C ... 75 °C
Ambient temperature (storage/transport)	-25 °C ... 80 °C
Altitude	≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)

EAC
Identification	EAC
ATEX
Identification	 II 3 G Ex nA IIC T4 Gc X
Note	Please follow the special installation instructions in the documentation!
Corrosive gas test
Identification	ISA-S71.04-1985 G3 Harsh Group A