SUBCON-PLUS-CAN/PG - D-SUB bus connector Phoenix Contact

Mã sản phẩm: 2708119

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

D-SUB connector, 9-pos. socket, 35° cable entry, bus system: CAN, CANopen®, SafetyBUS p up to 1 Mbps, with PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 2, 3, 7, 9; screw terminal blocks

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Product type	Data plug
MTTF	6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		1817 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		155 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Pin assignment	2, 3, 7, 9

Nominal voltage U_N	5 V
Nominal current I_N	100 mA
Transmission medium	Copper

D-SUB connection
Connection method	D-SUB connector
PCB connection
Connection method	Screw connection
Stripping length	5 mm
Conductor cross section, rigid min.	0.14 mm²
Conductor cross section, rigid max.	1.5 mm²
Conductor cross section flexible min.	0.14 mm²
Conductor cross section flexible max.	1 mm²
Single-wire/terminal point, rigid AWG min.	26
Single-wire/terminal point, rigid AWG max.	16
Min. AWG conductor cross section, flexible	26
Max. AWG conductor cross section, flexible	18
Programming connection
Connection method	D-SUB connector

Bus system	CAN, CANopen, SafetyBus-P
Signal	CAN
		CANopen^®
		SafetyBUS p

Dimensional drawing
Width	16.6 mm
Height	39.4 mm
Length	58 mm
External dimensions
External diameter min.	7.6 mm
External diameter max.	8.4 mm

Material Housing

ABS, metal-plated

External cable diameter

7.6 mm ... 8.4 mm (Incoming bus line)

Mechanical data
Insertion/withdrawal cycles	> 200

Ambient conditions
Degree of protection	IP40
Ambient temperature (operation)	-20 °C ... 75 °C
Ambient temperature (storage/transport)	-25 °C ... 80 °C
Altitude	≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)

EAC
Identification	EAC
ATEX
Identification	 II 3 G Ex nA IIC T4 Gc X
Note	Please follow the special installation instructions in the documentation!
Corrosive gas test
Identification	ISA-S71.04-1985 G3 Harsh Group A