SUBCON 15/F-SH - D-SUB bus connector Phoenix Contact

Mã sản phẩm: 2761596

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

D-SUB connector, 15-pos. female connector, one 35° cable entry, universal type for all systems, pin assignment: 1, 2, 3, ..., 14, 15 to screw connection terminal block

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Product type	Data plug
MTTF	6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		1817 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		155 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Pin assignment	All connections are 1:1 on the screw terminal block

Nominal voltage U_N	50 V DC
Nominal current I_N	100 mA
Transmission medium	Copper

D-SUB connection
Connection method	D-SUB socket
PCB connection
Connection method	Screw connection
Stripping length	5 mm
Conductor cross section, rigid min.	0.14 mm²
Conductor cross section, rigid max.	1.5 mm²
Conductor cross section flexible min.	0.14 mm²
Conductor cross section flexible max.	1 mm²
Single-wire/terminal point, rigid AWG min.	26
Single-wire/terminal point, rigid AWG max.	16
Min. AWG conductor cross section, flexible	26
Max. AWG conductor cross section, flexible	18

Signal

Modbus

Dimensional drawing
Width	16 mm
Height	55 mm
Length	65 mm

Material Housing

ABS, metal-plated

External cable diameter

4 mm ... 10 mm (Incoming bus line)

Mechanical data
Insertion/withdrawal cycles	> 200

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-20 °C ... 75 °C
Ambient temperature (storage/transport)	-25 °C ... 80 °C
Altitude	≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation)	10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)	5 % ... 95 % (non-condensing)

ATEX
Identification	 II 3 G Ex nA IIC T4 Gc X
Note	Please follow the special installation instructions in the documentation!
Corrosive gas test
Identification	ISA-S71.04-1985 G3 Harsh Group A