SFP 1-20/230AC - EMC filter surge protection device Phoenix Contact

Mã sản phẩm: 2859987

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Device protection, according to type 3/class III, with network interference suppression filter to prevent high-frequency interference voltages, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Type	DIN rail module, one-piece
Product type	Interference filters
Product family	SFP
Number of positions	2
For country-specific use in	D, A, I, NL, S, E, FIN, P
Surge protection fault message	Optical, remote indicator contact
Insulation characteristics
Overvoltage category	III
Pollution degree	2
IEC test classification	III
IEC test classification		T3
EN type	T3
Number of ports	Two

Indicator/remote signaling
Connection name	Remote fault indicator contact
Switching function	Changeover contact
Operating voltage	12 V AC ... 250 V AC
Operating voltage		250 V DC (250 mA DC)
Operating current	100 mA AC ... 1 A AC
Operating current		1 A DC (48 V DC)

Connection method	Screw terminal blocks
Screw thread	M3
Tightening torque	0.5 Nm ... 0.6 Nm
Tightening torque		4.5 lb_f-in. ... 5.5 lb_f-in.
Conductor cross section flexible	2.5 mm² ... 4 mm²
Conductor cross section rigid	2.5 mm² ... 6 mm²
Conductor cross section AWG	14 ... 10

Dimensional drawing
Width	112 mm
Height	86.6 mm
Depth	79 mm

Color	black
Color		silver
Flammability rating according to UL 94	V-0
Insulating material	ABS
Housing material	Aluminum

Mechanical data
Open side panel	No

Mode of protection	L-N
		L-PE
		N-PE
Direction of action	L-N & L(N)-PE
Nominal voltage U_N	240 V AC (TN)
		240 V AC (TT - only in use with RCD)
		240 V AC (IT - only in use with RCD)
Nominal frequency f_N	50 Hz (60 Hz)
Maximum continuous voltage U_C	264 V AC
Rated load current I_L	20 A (40 °C)
Residual current I_PE	≤ 0.6 mA
Standby power consumption P_C	≤ 25 VA (at U_REF)
Standby power consumption P_C		≤ 27.5 VA (at U_C)
Reference test voltage U_REF	264 V AC
Nominal discharge current I_n (8/20) µs	5 kA
Combination wave U_OC	10 kV (5 kA)
Voltage protection level U_p	≤ 1 kV
TOV behavior at U_T (L-N)	350 V AC (5 s / withstand mode)
TOV behavior at U_T (L-N)		457 V AC (120 min / safe failure mode)
TOV behavior at U_T (L-PE)	457 V AC (5 s / withstand mode)
		350 V AC (120 min / withstand mode)
		1464 V AC (200 ms / safe failure mode)
TOV behavior at U_T (N-PE)	1200 V AC (200 ms / safe failure mode)
Response time t_A	≤ 25 ns
Capacity (L-N)	1 µF ±10 %
Capacity (L-N)		10 nF ±10 % (X2-275 V)
Capacity (L-PE)	2.2 nF ±20 % (Y2-250 V)
Capacity (N-PE)	2.2 nF ±20 % (Y2-250 V)
Max. required back-up fuse	20 A (MCB B/general purpose)
Max. required back-up fuse		16 A (IT - MCB B/general purpose)
Input attenuation aE, sym.	20 dB (≥ 100 kHz / 50 Ω)
Input attenuation aE, asym.	30 dB (≥ 1 MHz / 50 Ω)
Short-circuit current rating I_SCCR	5 kA AC (TN/TT)
Short-circuit current rating I_SCCR		1 kA AC (IT)
Filter data
Discharge resistance	820 kΩ

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C
Ambient temperature (storage/transport)	-25 °C ... 70 °C
Permissible humidity (operation)	5 % ... 95 %

Air clearances and creepage distances
Standards/regulations	DIN VDE 0110-1 / IEC 60664-1 / IEC 61643-1
Standards/specifications	IEC 61643-11
Standards/specifications	EN 61643-11