SCX 4POE 2T - Industrial Ethernet Switch Phoenix Contact

Mã sản phẩm: 1108542

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Smart Camera Box to connect PoE end devices, four PoE ports, two uplink ports (RJ45), integrated Managed Switch and surge protection, supply voltage 100 ... 240 V AC, wall or mast mounting

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Dimensional drawing
Width	284 mm
Height	364 mm
Depth	121 mm

Material Housing	Polycarbonate PC
Material Cable gland	Polyamide
Material Cable gland seal, black	Neoprene
Flammability rating according to UL 94	V0 (Housing, a vertically clamped sample is extinguished within 10 seconds, no flaming droplets of molten plastic, smoldering for a maximum of 60 seconds)
Flammability rating according to UL 94		V2 (Cable gland; a vertically tensioned sample is extinguished within 30 seconds; flaming droplets are permitted)
Impact strength	IK10 (in accordance with IEC 62262: Impact energy of 20 J, corresponds to 5 kg from a height of 40 cm)

Mounting type	Wall mounting
Mounting type		Mast mounting

Basic functions	Store-and-forward switch, complies with IEEE 802.3
Data: Ethernet / Fast Ethernet / Gigabit Ethernet
Transmission speed	10/100/1000 Mbps
Connection method	RJ45 jack
No. of channels	4 (RJ45 ports)
Transmission length	100 m (per segment)
Transmission medium	Copper
Maximum output power	165 W (>55°C derating, see data sheet)
		155 W (If switching output is active, >55°C derating)
		90 W (per port POE1...3, >50°C derating, see data sheet)
		30 W (POE4)
Data: Ethernet / Fast Ethernet / Gigabit Ethernet
Transmission speed	10/100/1000 Mbps
Connection method	RJ45 jack
No. of channels	2 (RJ45 ports)
Transmission length	100 m (per segment)
Transmission medium	Copper
Data: Configuration interface
Connection method	RJ45 jack
No. of channels	1 (RJ45 port)
Data: Switching output
Connection method	Push-in spring connection
No. of channels	1 (Push-in Technology)
Conductor cross section flexible max.	1.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 0.75 mm² (Stripping length 8 mm)
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm² (Stripping length 8 mm)
Conductor cross section, rigid max.	1.5 mm²
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section AWG max.	16
Conductor cross section AWG min.	24
Stripping length	10 mm
Load/output load current output	no inductive load
Output nominal voltage	24 V DC ±10 % (Supply for devices within the Smart Camera Box)
Output current	300 mA (typical)

Product type	Switch
Product family	Smart Camera Box
MTTF	441 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		224 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		92 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Insulation characteristics
Protection class	I (Protective grounding of all conductive housing parts)
Insulation characteristics
Overvoltage category	III (With protection modules plugged in)
Overvoltage category		II (Without protection modules)
Pollution degree	2
Switch functions
Diagnostic functions	RMON History
		LLDP (Link Layer Discovery Protocol)
		SNMP traps
		N:1-Portmirroring
		ACD (Address Conflict Detection)
Basic functions	Store-and-forward switch, complies with IEEE 802.3
Filter functions	Port prioritization
Filter functions		VLAN (up to 32 VLANs)
IP parameterization	DHCP client
		BootP
		Static IP address
MAC address table	8k
Management	Web-based management (HTTP/HTTPS)
		SNMPv2/v3
		Command-line interface (Telnet, SSH)
Redundancy	RSTP (Rapid Spanning Tree Protocol in accordance with IEEE 802.1D-2004)
		Large Tree Support
		FRD (Fast Ring Detection)
Additional functions	Jumbo frames
Time synchronization	SNTP (Simple Network Time Protocol)
Security functions
Basic functions	Store-and-forward switch, complies with IEEE 802.3

Rated insulation voltage	3 kV AC (Input / output, IEC/EN 60950-1)
Supply
Supply voltage range	100 V AC ... 240 V AC -15 % ... +10 % (Single-phase)
Connection method	Push-in spring connection

Supply
Connection method	Push-in spring connection
Conductor cross section flexible, with ferrule without plastic sleeve	0.2 mm² ... 4 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.2 mm² ... 4 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve	0.5 mm² ... 1.5 mm²
Conductor cross section, flexible	0.20 mm² ... 6.00 mm²
Conductor cross section, rigid	1.00 mm² ... 6.00 mm²
Conductor cross section, flexible [AWG]	24 ... 10
Stripping length	10 mm

Ambient conditions
Degree of protection	IP65 (in accordance with DIN EN 60529: Complete touch protection, dust cannot enter, spray water from any direction)
Impact strength	IK10 (in accordance with IEC 62262: Impact energy of 20 J, corresponds to 5 kg from a height of 40 cm)
Ambient temperature (operation)	-40 °C ... 70 °C (>50°C derating)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	2000 m
Permissible humidity (operation)	10 % ... 95 % (non-condensing)

Other resistance	UV-resistant in accordance with UL746C, f1 listing/rating Outdoor housing, subject to 1,000 hour xenon weather testing, 7-day water submergence test
Standards/regulations	IEC 62444
Standard designation	Strain relief
Standards/regulations	IEC 61249-2-21
Standard designation	Halogen-free (housing, bromine: <900 ppm, chlorine: <900 ppm, total halogen content: <1,500 ppm)
Standards/regulations	DIN EN 45545-2, requirement set R22, hazard level HL3
Standard designation	Fire protection

CE
Certificate	CE-compliant
UKCA
Certificate	UKCA-compliant
UL, USA/Canada
Identification	Listed
		UL 61010-1, 3rd Edition
		UL 61010-2-201, 2nd Edition
		CAN/CSA C22.2 No. 61010-1-12
		CSA C22.2 No. 61010-2-201:18
Corrosive gas test
Identification	ISA-S71.04-1985 G3 Harsh Group A

Noise immunity	EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Conducted noise emission	EN 61000-6-3 Class B, domain of use: residential and small commercial
Noise emission	EN 61000-6-4, Class B, domain of use: residential and small commercial
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	± 6 kV
Discharge in air	± 8 kV
Indirect discharge	± 6 kV
Comments	Criterion B
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 3 GHz (80% amplitude modulation with 1 kHz)
Field intensity	10 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	± 2.2 kV (1 minute)
Signal	± 2.2 kV (1 minute)
Comments	Criterion B
Surge current load (surge)
Standards/regulations	EN 61000-4-5
Surge current load (surge)
Input	± 1 kV (AC supply, line to line)
Input		± 2 kV (AC supply, line to ground)
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz (80% amplitude modulation with 1 kHz)
Comments	Criterion A
Voltage	10 V
Emitted interference
Standards/regulations	EN 61000-6-4
Comments	Class B, domain of use: residential and small commercial
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.