category Tất cả danh mục
Menu
SACCBP-M12MS-5CON-M16/1,0-920X     -     Device connector, rear mounting   Phoenix Contact

SACCBP-M12MS-5CON-M16/1,0-920X - Device connector, rear mounting Phoenix Contact

Mã sản phẩm: 1237411

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 2,

Device connector, rear mounting, CANopen®, DeviceNet™, 5-position halogen-free, red lilac RAL 4001, shielded, Flush-type male connector, straight, M12-SPEEDCON, coding: A , on free cable end, Rear mounting, M16 x 1.5, cable length: 1 m, CANopen®/DeviceNet™, PUR, violet, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb <0.1%)

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

General The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Mounting type Rear mounting M16 x 1.5 With flat nut
Assembly instructions With flat nut
Product type Circular connectors (device side)
Number of positions 5
Sensor type CANopen®
Shielded yes
Coding A
Insulation characteristics
Overvoltage category II
Degree of pollution 3
Flammability rating according to UL 94 V0
Seal material FKM
Contact material CuZn
Contact surface material Ni/Au
Contact carrier material PA 6.6
Material for screw connection Zinc die-cast, nickel-plated
Rated surge voltage 1.5 kV
Nominal voltage UN 48 V AC
  60 V DC
Nominal current IN 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Transmission medium Copper
Mechanical data
Insertion/withdrawal cycles > 100
Connection 1
Head design Flush-type male connector
Head cable outlet straight
Head thread type M12
Head locking type SPEEDCON
Coding A
Connection 2
Head design free cable end
Cable length 1 m
CANopen®/DeviceNet™, PUR, violet [920]
Dimensional drawing
Cable weight 90 kg/km
UL AWM Style 21198 (80°C/300 V)
Number of positions 4
Shielded yes
Cable type CANopen®/DeviceNet™, PUR, violet [920]
Conductor structure 2xAWG24/19+2xAWG22/19
Conductor structure signal line 19x 0.13 mm
AWG signal line 24
Conductor cross section 2x 0.25 mm² (Data cable)
  2x 0.34 mm² (Power supply)
  1x 0.34 mm² (Drain wire)
Wire diameter incl. insulation 1.95 mm ±0.05 mm (Data cable)
  1.4 mm ±0.05 mm (Power supply)
External cable diameter 6.7 mm ±0.3 mm
Outer sheath, material PUR
External sheath, color red lilac RAL 4001
Conductor material Tin-plated Cu litz wires
Material wire insulation Foamed PE (Data cable)
  PE (Power supply)
Single wire, color red-black, blue-white
Twisted pairs 2 cores to the pair
Type of pair shielding Plastic-coated aluminum foil, aluminum side outside
Overall twist 2 pairs around a drain wire in the center to the core
Optical shield covering 80 %
Insulation resistance ≥ 5 GΩ*km (Data cable)
  ≥ 5 GΩ*km (Power supply)
Loop resistance ≤ 181.80 Ω/km (Data cable)
  ≤ 114.80 Ω/km (Power supply)
Wave impedance 120 Ω ±10 % (with 1 MHz)
Cable capacity nom. 40 nF/km (Data cable)
Nominal voltage, cable ≤ 300 V (Peak value, not for high-power applications)
Test voltage Core/Core 2000 V (50 Hz, 1 min.)
Test voltage Core/Shield 2000 V (50 Hz, 1 min.)
Minimum bending radius, fixed installation 5 x D
Minimum bending radius, flexible installation 10 x D
Max. bending cycles 5000000
Shield attenuation ≤ 22.9 dB/km (with 1 MHz)
  ≤ 16.4 dB/km (At 500 kHz)
  ≤ 9.5 dB/km (At 125 kHz)
Halogen-free in accordance with DIN VDE 0472 part 815
  according to IEC 60754-1
Flame resistance UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1)
  UL 1581, Section 1100 and UL 2556, Section 9.1 (HFT/FT2)
  IEC 60332-1-2
  in accordance with ISO 6722-1 5.22 (UN ECE-R 118.01)
Other resistance Low adhesion
Ambient temperature (operation) -40 °C ... 80 °C (cable, fixed installation)
  -30 °C ... 70 °C (Cable, flexible installation)
  -20 °C ... 60 °C (for installation)
  -20 °C ... 60 °C (cable, drag chain applications)
Ambient conditions
Degree of protection IP67 (When plugged in)
  IP65 (When plugged in)
  IP65/IP67
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
  -40 °C ... 85 °C (without mechanical actuation)
M12
Standards/specifications IEC 61076-2-101

Sản phẩm thịnh hành

Máy nén Embraco NTX6238U 843JA72 2172W

Máy nén Embraco NTX6238U 843JA72 2172W

Mã SP: 843JA72

Thương hiệu: Embraco

Xuất xứ:

Máy nén Embraco NTX6238U 843JA72 2446W

Máy nén Embraco NTX6238U 843JA72 2446W

Mã SP: 843JA72

Thương hiệu: Embraco

Xuất xứ:

Máy nén Embraco NTX6238U 843JA72 2735W

Máy nén Embraco NTX6238U 843JA72 2735W

Mã SP: 843JA72

Thương hiệu: Embraco

Xuất xứ:

Máy nén Embraco NTX6238U 843JA72 2841W

Máy nén Embraco NTX6238U 843JA72 2841W

Mã SP: 843JA72

Thương hiệu: Embraco

Xuất xứ:

Máy nén Embraco NTX6233U 843FA72 1868W

Máy nén Embraco NTX6233U 843FA72 1868W

Mã SP: 843FA72

Thương hiệu: Embraco

Xuất xứ:

Máy nén Embraco NTX6233U 843FA72 2088W

Máy nén Embraco NTX6233U 843FA72 2088W

Mã SP: 843FA72

Thương hiệu: Embraco

Xuất xứ:

Máy nén Embraco NTX6233U 843FA72 2348W

Máy nén Embraco NTX6233U 843FA72 2348W

Mã SP: 843FA72

Thương hiệu: Embraco

Xuất xứ:

Máy nén Embraco NTX6233U 843FA72 2425W

Máy nén Embraco NTX6233U 843FA72 2425W

Mã SP: 843FA72

Thương hiệu: Embraco

Xuất xứ:

Máy nén Embraco NTX6225UV 843HD72 1702W

Máy nén Embraco NTX6225UV 843HD72 1702W

Mã SP: 843HD72

Thương hiệu: Embraco

Xuất xứ:

Máy nén Embraco NTX6225UV 843HD72 1978W

Máy nén Embraco NTX6225UV 843HD72 1978W

Mã SP: 843HD72

Thương hiệu: Embraco

Xuất xứ:

Máy nén Embraco NTX6225UV 843HD72 2161W

Máy nén Embraco NTX6225UV 843HD72 2161W

Mã SP: 843HD72

Thương hiệu: Embraco

Xuất xứ:

Máy nén Embraco NTX6225UV 843HD72 2236W

Máy nén Embraco NTX6225UV 843HD72 2236W

Mã SP: 843HD72

Thương hiệu: Embraco

Xuất xứ: