SACC-M12MSS-3PECT-CM SH - Power connector Phoenix Contact

Mã sản phẩm: 1027467

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 3,

Power connector, Power, 4-position, shielded, Plug straight M12, S, Crimp connection, knurl material: Zinc die-cast, tin-plated, external cable diameter 6.5 mm ... 11 mm, without crimp contacts, Contact 4 leading

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Connection method

Crimp connection

Product type	Circular connector (cable-side)
Number of positions	4
Sensor type	Power
Application	Power supply
No. of cable outlets	1
Shielded	yes
Coding	S
Cable outlet	straight
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Dimensional drawing
Length	58 mm
External dimensions
Outside diameter	6.5 mm ... 11 mm
Housing
Diameter housing	21.5 mm

Flammability rating according to UL 94	V0
Material of grip body	Zinc die-cast, nickel-plated
Contact carrier material	PA
Material for screw connection	Zinc die-cast, tin-plated

Conductor connection
Connection method	Crimp connection
Connection cross section	1.5 mm² ... 2.5 mm² (flexible)
Connection cross section AWG	14 (flexible)
Tightening torque	5 Nm (Pressure nut with coupling sleeve)
Pin assignment
Contact \| Color (signal designation) \| Contact (optional)	1 = BK1
		2 = BK2
		3 = BK3
		PE = GNYE

Rated surge voltage	6 kV
Insulation resistance	≥ 100 MΩ
Nominal voltage U_N	690 V AC
Nominal current I_N	12 A (when using 1.5 mm² conductors)
Nominal current I_N		12 A (at 40 °C)