SACC-M12MS-5PL SH DN - Data connector Phoenix Contact

Mã sản phẩm: 1424670

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 3,

Data connector, CANopen®, DeviceNet™, 5-position, shielded, Plug straight M12, A, Push-lock spring connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Assembly instructions	The wires can be connected both with ferrules and without ferrules
Connection method	Push-lock spring connection

Product type	Circular connector (cable-side)
Number of positions	5
Sensor type	CANopen^®
Application	Data
No. of cable outlets	1
Shielded	yes
Coding	A
Cable outlet	straight
Insulation characteristics
Overvoltage category	II
Degree of pollution	3

Dimensional drawing
Length	50 mm
External dimensions
Outside diameter	4 mm ... 8 mm
Housing
Diameter housing	19 mm

Material	TPE-U
Material		PA 6
Flammability rating according to UL 94	V0
Seal material	NBR
Material of grip body	Zinc die-cast, nickel-plated
Contact material	CuSn
Contact surface material	Ni/Au
Contact carrier material	PA 6.6
Material for screw connection	Zinc die-cast, nickel-plated
Standards/regulations	PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, R25, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Standards/regulations		PA 6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Conductor connection
Connection method	Push-lock spring connection
Connection cross section	0.14 mm² ... 0.75 mm² (without ferrule)
		0.08 mm² ... 0.5 mm² (with ferrule)
		0.14 mm² ... 0.75 mm² (solid)
Connection cross section AWG	26 ... 18 (without ferrule)
Connection cross section AWG		28 ... 20 (with ferrule)
Stripping length of the individual wire	7 mm
Tightening torque	0.4 Nm (M12 knurl)
		0.8 Nm (Connector with coupling sleeve)
		3 Nm (Pressure nut with coupling sleeve)
Pin assignment
Contact \| Color (signal designation) \| Contact (optional)	1 = GY (shield)
		2 = RD
		3 = BK
		4 = WH
		5 = BU

Rated surge voltage	1.5 kV
Contact resistance	≤ 5 mΩ
Insulation resistance	≥ 100 MΩ
Nominal voltage U_N	48 V AC
Nominal voltage U_N		60 V DC
Nominal current I_N	4 A (2 A when using 0.14 mm² conductors)

Mechanical data
Insertion/withdrawal cycles	≥ 100

Connection 1
Head design	Plug
Head cable outlet	straight
Head thread type	M12
Coding	A

Signal type/category	CANopen^®
Signal type/category		DeviceNet™
Stripping length of the individual wire	7 mm

Ambient conditions
Degree of protection	IP65
Degree of protection		IP67
Ambient temperature (operation)	-40 °C ... 85 °C (Plug / socket)

Testing
Standards/regulations	PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, R25, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Standards/regulations		PA 6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Standards/specifications	IEC 61076-2-101
Standards/specifications	EN 50155:2001