SACC-M12MS-4CON-PG11-M PWR - Power connector Phoenix Contact

Mã sản phẩm: 1404415

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 3,

Power connector, 4-position, Plug straight M12, A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg11, external cable diameter 8 mm ... 10 mm

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	Strip 22 mm off the cable sheath, strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductor with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm.
General	NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Connection method

Screw connection

Product type	Circular connector (cable-side)
Number of positions	4
Application	Power supply
No. of cable outlets	1
Shielded	no
Coding	A
Cable outlet	straight
Pg screw connection	Pg11
Insulation characteristics
Overvoltage category	II
Degree of pollution	3

Dimensional drawing
Width	20 mm
Height	20 mm
Length	65.5 mm
External dimensions
Outside diameter	8 mm ... 10 mm
Housing
Diameter housing	20 mm

Color Handle area	black
Flammability rating according to UL 94	V0
Seal material	NBR
Material of grip body	PA
Contact material	CuZn
Contact surface material	Ni/Au
Contact carrier material	PA
Material for screw connection	Zinc die-cast, nickel-plated

Conductor connection
Connection method	Screw connection
Connection cross section	0.75 mm² ... 1.5 mm² (without ferrule)
		0.75 mm² ... 1.5 mm² (with ferrule)
		0.75 mm² ... 1.5 mm² (solid)
Connection cross section AWG	18 ... 16 (without ferrule)
Connection cross section AWG		16 ... 18 (with ferrule)
Stripping length of the individual wire	5 mm
Tightening torque	0.4 Nm (M12 knurl)
		1.5 Nm ... 2 Nm (Pressure screw with sleeve housing)
		0.4 Nm (Screw plug insert with sleeve housing as far it will go)
		0.2 Nm (Screw terminal blocks)

Rated surge voltage	2.5 kV
Contact resistance	≤ 3 mΩ
Insulation resistance	> 10 GΩ
Nominal voltage U_N	250 V AC
Nominal voltage U_N		250 V DC
Nominal current I_N	8 A (when using 1.5 mm² conductors)