SACC-M12MRD-4Q SH PN - Data connector Phoenix Contact

Mã sản phẩm: 1554539

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 3,

Data connector, PROFINET CAT5 (100 Mbps), 4-position, shielded, Plug angled M12, D, Insulation displacement connection, knurl material: Nickel-plated brass, external cable diameter 4 mm ... 8 mm

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling)
General	NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Assembly instructions	The connector pin assignment can be rotated 45° to the cable outlet
Connection method	Insulation displacement connection

Product type	Circular connector (cable-side)
Number of positions	4
Sensor type	PROFINET
Application	Data
No. of cable outlets	1
Shielded	yes
Coding	D
Cable outlet	angled
Insulation characteristics
Overvoltage category	II
Degree of pollution	3

External dimensions
Outside diameter	4 mm ... 8 mm

Flammability rating according to UL 94	V0
Seal material	Neoprene
Material of grip body	Zinc die-cast, nickel-plated
Contact material	CuSn
Contact surface material	Ni/Au
Contact carrier material	PA 6
Material for screw connection	Nickel-plated brass

Conductor connection
Connection method	Insulation displacement connection
Connection cross section AWG	23 ... 22
Tightening torque	0.4 Nm (M12 knurl)
		0.8 Nm (Connector with coupling sleeve)
		3 Nm (Pressure nut with coupling sleeve)
Pin assignment
Contact \| Color (signal designation) \| Contact (optional)	1 (Plug) = YE (TD+)
		3 (Plug) = OG (TD-)
		2 (Plug) = WH (RD+)
		4 (Plug) = BU (RD-)