SACC-M12MR-5PL - Connector Phoenix Contact

Mã sản phẩm: 1424688

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 2,

Connector, Universal, 5-position, unshielded, Plug angled M12, A, Push-lock spring connection, knurl material: Plastic, external cable diameter 4 mm ... 8 mm

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Assembly instructions	The connector pin assignment can be rotated 45° to the cable outlet
Assembly instructions		The wires can be connected both with ferrules and without ferrules
Connection method	Push-lock spring connection

Product type	Circular connector (cable-side)
Number of positions	5
Sensor type	Universal
No. of cable outlets	1
Shielded	no
Coding	A
Cable outlet	angled
Insulation characteristics
Overvoltage category	II
Degree of pollution	3

Dimensional drawing
Length	51 mm
External dimensions
Outside diameter	4 mm ... 8 mm
Housing
Diameter housing	19 mm

Color Handle area	black
Flammability rating according to UL 94	V0
Seal material	NBR
Material of grip body	PA 6.6
Contact material	CuSn
Contact surface material	Ni/Au
Contact carrier material	PA 6.6
Material for screw connection	Plastic

Conductor connection
Connection method	Push-lock spring connection
Connection cross section	0.14 mm² ... 0.75 mm² (without ferrule)
		0.08 mm² ... 0.5 mm² (with ferrule)
		0.14 mm² ... 0.75 mm² (solid)
Connection cross section AWG	26 ... 18 (without ferrule)
Connection cross section AWG		28 ... 20 (with ferrule)
Stripping length of the individual wire	7 mm
Tightening torque	0.4 Nm (M12 knurl)
		0.4 Nm (Connector with coupling sleeve)
		1.5 Nm (Pressure nut with coupling sleeve)
Pin assignment
Contact \| Color (signal designation) \| Contact (optional)	1 = BN
		2 = WH
		3 = BU
		4 = BK
		5 = GY

Rated surge voltage	1.5 kV
Contact resistance	≤ 5 mΩ
Insulation resistance	≥ 100 MΩ
Nominal voltage U_N	48 V AC
Nominal voltage U_N		60 V DC
Nominal current I_N	4 A (2 A when using 0.14 mm² conductors)