SACC-M12MR-5CT-CM SH - Connector Phoenix Contact

Mã sản phẩm: 1422851

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 3,

Connector, Universal, 5-position, shielded, Plug angled M12, A, Crimp connection, knurl material: Zinc die-cast, tin-plated, external cable diameter 4.5 mm ... 7.5 mm, without crimp contacts

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Assembly instructions	Contacts can be clipped in place and unclipped without tools
Assembly instructions		The pin assignment can be rotated in a 30° pitch to the cable outlet
Connection method	Crimp connection

Product type	Circular connector (cable-side)
Number of positions	5
Sensor type	Universal
No. of cable outlets	1
Shielded	yes
Coding	A
Cable outlet	angled
Insulation characteristics
Overvoltage category	III
Degree of pollution	3

Dimensional drawing
Length	52 mm
Wrench size, union nut	15 mm
Wrench size, counter nut	14 mm
External dimensions
Outside diameter	4.5 mm ... 7.5 mm
Housing
Diameter housing	16 mm

Flammability rating according to UL 94	V0
Seal material	FKM
Material of grip body	Zinc die-cast, nickel-plated
Contact carrier material	PA 6.6
Material for screw connection	Zinc die-cast, tin-plated
Standards/regulations	PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

Conductor connection
Connection method	Crimp connection
Connection cross section	0.14 mm² ... 1 mm² (flexible)
Connection cross section AWG	26 ... 18 (flexible)
Stripping length of the individual wire	4 mm +0,5 mm
Tightening torque	0.4 Nm (M12 knurl)
		1.5 Nm (Screw plug insert with sleeve housing as far it will go)
		4 Nm (Pressure nut with coupling sleeve)
Pin assignment
Contact \| Color (signal designation) \| Contact (optional)	1 = BN
		2 = WH
		3 = BU
		4 = BK
		5 = GY

Rated surge voltage	1.5 kV
Insulation resistance	≥ 100 MΩ
Nominal voltage U_N	48 V AC
Nominal voltage U_N		60 V DC
Nominal current I_N	4 A

Mechanical data
Insertion/withdrawal cycles	≥ 100

Connection 1
Head design	Plug
Head cable outlet	angled
Head thread type	M12
Coding	A

Signal type/category	Universal
Stripping length of the individual wire	4 mm +0,5 mm

Ambient conditions
Degree of protection	IP65
Degree of protection		IP67
Ambient temperature (operation)	-40 °C ... 85 °C (Plug / socket)

Testing
Standards/regulations	PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Standards/specifications	IEC 61076-2-101
Standards/specifications	EN 50155:2001