SACC-M12FR-5CON-PG11-M PWR - Power connector Phoenix Contact

Mã sản phẩm: 1408993

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 3,

Power connector, 5-position, Socket angled M12, A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg11, external cable diameter 8 mm ... 10 mm

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	Strip 22 mm off the cable sheath, shorten conductor for the fifth position by 10 mm. Strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductors with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm.
General	NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Assembly instructions	The connector pin assignment can be rotated 90° to the cable outlet
Connection method	Screw connection

Product type	Circular connector (cable-side)
Number of positions	5
Application	Power supply
No. of cable outlets	1
Shielded	no
Coding	A
Cable outlet	angled
Pg screw connection	Pg11
Insulation characteristics
Overvoltage category	II
Degree of pollution	3

Dimensional drawing
Length	39 mm
External dimensions
Outside diameter	8 mm ... 10 mm
Housing
Diameter housing	20.2 mm

Color Handle area	black
Flammability rating according to UL 94	V0
Seal material	Viton
Seal material		NBR
Material of grip body	PA
Contact material	CuZn
Contact surface material	Ni/Au
Contact carrier material	PA
Material for screw connection	Zinc die-cast, nickel-plated

Conductor connection
Connection method	Screw connection
Connection cross section	0.75 mm² ... 1.5 mm² (without ferrule)
		0.75 mm² ... 1.5 mm² (with ferrule)
		0.75 mm² ... 1.5 mm² (solid)
Connection cross section AWG	18 ... 16 (without ferrule)
Connection cross section AWG		16 ... 18 (with ferrule)
Stripping length of the individual wire	5 mm
Tightening torque	0.4 Nm (M12 knurl)
		1.5 Nm ... 2 Nm (Pressure screw with sleeve housing)
		0.4 Nm (Screw plug insert with sleeve housing as far it will go)
		0.2 Nm (Screw terminal blocks)

Rated surge voltage	0.8 kV
Contact resistance	≤ 3 mΩ
Insulation resistance	> 10 GΩ
Nominal voltage U_N	48 V AC
Nominal voltage U_N		60 V DC
Nominal current I_N	8 A (Contact 5: 2 A)
Nominal current I_N		when using 1.5 mm² conductors