SACC-FS-12PCON SCO - Connector Phoenix Contact

Mã sản phẩm: 1559631

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact 3,

Connector, Universal, 12-position, Socket straight M12 SPEEDCON, A, Piercecon® fast connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 5.4 mm ... 8.2 mm

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Connection method

Piercecon^® fast connection

Product type	Circular connector (cable-side)
Number of positions	12
Sensor type	Universal
No. of cable outlets	1
Shielded	no
Coding	A
Cable outlet	straight
Insulation characteristics
Overvoltage category	II
Degree of pollution	3

Dimensional drawing
Length	41.2 mm
Wrench size, union nut	13 mm
Wrench size, counter nut	15 mm
External dimensions
Outside diameter	5.4 mm ... 8.2 mm
Housing
Diameter housing	16 mm

Flammability rating according to UL 94	V0
Seal material	FKM
Material of grip body	Zinc die-cast, nickel-plated
Contact material	CuZn
Contact surface material	Ni/Au
Contact carrier material	PA
Material for screw connection	Zinc die-cast, nickel-plated
Wire insulation material	PUR / PVC

Conductor connection
Connection method	Piercecon^® fast connection
Connection cross section	0.14 mm² ... 0.14 mm² (without ferrule)
Connection cross section AWG	26 ... 26 (without ferrule)
Tightening torque	0.4 Nm (M12 knurl)
Pin assignment
Contact \| Color (signal designation) \| Contact (optional)	1 = BN
		2 = BU
		3 = WH
		4 = GN
		5 = PK
		6 = YE
		7 = BK
		8 = GY
		9 = RD
		10 = VT
		11 = GYPK
		12 = RDBU

Rated surge voltage	0.8 kV
Contact resistance	≤ 5 mΩ
Insulation resistance	≥ 100 MΩ
Nominal voltage U_N	30 V AC
Nominal voltage U_N		30 V DC
Nominal current I_N	1.5 A