SACC-CC-5QO-0,75 SH - Conductor connectors Phoenix Contact

Mã sản phẩm: 1414417

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

Cable connector, 5-pos., halogen-free, shielded, insulation displacement connection, housing material: zinc die-cast, nickel-plated, outer cable diameter of 5 mm ... 9.7 mm

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Assembly instructions	If the conductor is to be reconnected, it must be cut off above the last contact point.
Connection method	Insulation displacement connection

Product type	Cable connector
Number of positions	5
Sensor type	Universal
No. of cable outlets	2
Shielded	yes
Insulation characteristics
Overvoltage category	II
Degree of pollution	3

Dimensional drawing
Length	83 mm
Wrench size, union nut	15 mm
Wrench size, counter nut	17 mm
External dimensions
Outside diameter	5 mm ... 9.7 mm

Connection technology
Connection method	Insulation displacement connection
Frequency of connections between conductors of the same cross section	10
Conductor connection
Conductor cross section flexible	0.14 mm²0.75 mm²
Conductor cross section AWG	2618
Structure of individual litz in acc. with VDE 0295 / smallest wire diameter	Class 2-6
Tightening torque	5 Nm (Pressure nut)
Wrench size, union nut	15 mm
Wrench size, contact carrier	17 mm
Wire diameter including insulation	0.75 mm ... 2 mm
Pin assignment
Contact \| Color (signal designation) \| Contact (optional)	1 = BN
		2 = WH
		3 = BU
		4 = BK
		5 = GY

Rated surge voltage	0.8 kV
Insulation resistance	≥ 100 MΩ
Nominal voltage U_N	48 V AC
Nominal voltage U_N		60 V DC
Nominal current I_N	4 A

Flammability rating according to UL 94	V0
Seal material	NBR
Material of grip body	Zinc die-cast, nickel-plated
Contact material	CuSn
Contact surface material	Ni/Au
Contact carrier material	PA 6.6
Material for screw connection	Zinc die-cast, nickel-plated
Standards/regulations	PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Wire insulation material	PVC / PE / PP / rubber

Connection 1
Head design	Cable connectors

Signal type/category

Universal

Ambient conditions
Degree of protection	IP65
Degree of protection		IP67
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (assembly)	-5 °C ... 50 °C

Testing
Standards/regulations	PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Standards/specifications	according to IEC 61076-2-101
Standards/specifications	EN 50155:2001