SACB-PT-H180- 4/3-M8 HD - Connector hood Phoenix Contact

Mã sản phẩm: 1197651

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

Connector hood, application: Standard, connection method: M8 socket Metal, number of slots: 4, number of positions: 3, slot assignment: single, status display: No, Universal; master cable connection: Plug-in push-in spring-cage connection 180°, shielding: no

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General

NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.

Product type	Connector hood without master cable
Number of positions	3
Application	Standard
Number of slots	4

Max. operating voltage U_max	30 V DC
Nominal voltage U_N	24 V DC
Rated current, total	8 A
Max. current carrying capacity per path	2 A
Current carrying capacity per slot	2 A

Conductor connection
Connection method	Plug-in push-in spring-cage connection
Stripping length	10 mm
Conductor cross section flexible	0.2 mm²
Cross section AWG	241.5 mm²
Conductor cross section flexible	0.2 mm²
Cross section AWG	2416
Tightening torque, cover screw	1 Nm
Pin assignment
Slot/position = Wire color or connection	1 / 4 (A) = 1 / 4
		2 / 4 (A) = 2 / 4
		3 / 4 (A) = 3 / 4
		4 / 4 (A) = 4 / 4
		1-4 / 1 (+ 24 V) = U_N
		1-4 / 3 (0 V) = 0 V

Status display present

Dimensional drawing
Wrench size, union nut	24 mm
Wrench size, counter nut	24 mm

Color	black
Material Housing	PBT
Material Cable gland	PA 6
Seal material	CR/NBR
Material of contact, master cable side	CU alloy
Material of the contact carrier on the master cable side	PA
Material of contact surface, master cable side	tin-plated

Sensor/actuator connection system	M8 socket
Connection method	Plug-in push-in spring-cage connection
Metric conductor cross section (Signal)	0.2 mm² ... 1.5 mm²
Cross section AWG (Signal)	24 ... 16
Stripping length (signal)	10 mm
Metric conductor cross section (Power)	0.2 mm² ... 1.5 mm²
Cross section AWG (Power)	24 ... 16
Stripping length for sheath	70 mm (Master cable)
Tightening torque, cover screw	1 Nm