SACB-4/T-L-8FUSE DIAG CT AXL - Power distributor Phoenix Contact

Mã sản phẩm: 1411048

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

Power distributor, application: Power supply, connection method: M12 socket Metal, number of slots: 4, number of positions: 4, coding: T, slot assignment: single, status display: Yes, Universal; master cable connection: Plug-in master cable connection 90°, shielding: no, Diagnostics port, M12, A-coded, 12-pos.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
General	Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories".

Product type	Distributor boxes with M8 to M12 slots
Number of positions	4
Application	Power supply
Number of slots	4
Coding	T

Color	black
Material Threaded sleeve	Die-cast zinc
Material Housing	PBT
Material Molding compound	PUR
Flammability rating according to UL 94	V0
Seal material	Viton
Seal material		NBR
Contact material	Cu alloy
Contact surface material	pre-nickel plated, gold-plated
Contact carrier material	PA
Material of contact, master cable side	CU alloy
Material of the contact carrier on the master cable side	PC
Material of contact surface, master cable side	Silver-plated

Dimensional drawing
Width	60 mm
Height	52 mm
Length	212 mm

Conductor connection
Connection method	Plug-in master cable connection
Conductor cross section Flexible power supply	2.5 mm² ... 6 mm²
Connection cross section AWG Flexible power supply	14 ... 10
Tightening torque, cover screw	0.6 Nm
Tightening torque slot sensor/actuator cable	0.4 Nm

Status display present

Yes

Max. operating voltage U_max	30.5 V DC
Local diagnostics	Supply voltage per module Green LED
Local diagnostics		Status display I/O Yellow LED
Nominal voltage U_N	24 V DC
Rated current, total	70 A (at 40°C, observe the distribution of the current paths under load)
Protective circuit	Overload protection for the outputs; Fuse in header
Max. current carrying capacity per path	10 A (M12 diagnostic socket for each channel max. 50 mA)
Current carrying capacity per slot	2x 9.25 A (at 40 °C)

Sensor/actuator connection system	M12 socket
Connection method	Plug-in master cable connection
External cable diameter	9 mm ... 15.5 mm
Metric conductor cross section (Power)	2.5 mm² ... 6 mm²
Cross section AWG (Power)	14 ... 10
Tightening torque, cover screw	0.6 Nm
Tightening torque slot sensor/actuator cable	0.4 Nm
Tightening torque, union nut	5 Nm

Standards/specifications	IEC 61076-2-111
Standards/specifications	EN 60068-2-6
		EN 60068-2-27
		EN 60068-2-64

Ambient conditions
Degree of protection	IP66
Degree of protection		IP67
Ambient temperature (operation)	-25 °C ... 60 °C
Ambient temperature (storage/transport)	-25 °C ... 80 °C