SACB- 4/3-L-C-M8 HD GG - Sensor/actuator box header Phoenix Contact

Mã sản phẩm: 1197599

Danh mục: PHOENIX CONTACT, Kết nối (Connect) Phoenix Contact,

Sensor/actuator box header, application: Standard, connection method: M8 socket Metal, number of slots: 4, number of positions: 3, coding: A, slot assignment: single, status display: Yes, pnp; master cable connection: Plug-in master cable connection 180°, shielding: no

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

General	NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
General	Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories".

Product type	Header with metric measurement slots
Number of positions	3
Application	Standard
Number of slots	4
Coding	A
LED	yes

Local diagnostics
Monitored function	Supply voltage
Optical representation	Green LED

Max. operating voltage U_max	30 V DC
Local diagnostics	Supply voltage Green LED
Local diagnostics		Status display I/O Yellow LED
Nominal voltage U_N	24 V DC
Rated current, total	8 A
Max. current carrying capacity per path	2 A
Current carrying capacity per slot	2 A

Status display present

Yes

Dimensional drawing
Width	30 mm
Height	17 mm
Length	134 mm

Color	black
Material Threaded sleeve	Cu alloy
Material Housing	PBT
Material Molding compound	PUR
Seal material O-ring	FKM
Contact material	CuZn
Contact surface material	Ni/Au
Contact carrier material	PBT
Material of contact, master cable side	CU alloy
Material of the contact carrier on the master cable side	PA
Material of contact surface, master cable side	tin-plated

Sensor/actuator connection system	M8 socket
Connection method	Plug-in master cable connection
Tightening torque, cover screw	1 Nm
Tightening torque of mounting screw for fixing the housing	0.8 Nm