RAD-RS485-IFS - Communication module Phoenix Contact

Mã sản phẩm: 2702184

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Radioline - RS-485 multipoint multiplexer, can be extended with I/O modules, can be used as Modbus/RTU bus coupler or can be combined with Radioline wireless system, up to 99 stations, range of up to 1.2 km on in-house copper cables

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Utilization restriction
CCCex note	Use in potentially explosive areas is not permitted in China.

Product type	Communication module
Application	RS-485
Operating mode	I/O data (Default setting, configuration via thumbwheel)
Operating mode		Modbus/RTU server (Default setting, configuration via thumbwheel)
MTTF	1233 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		514 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		212 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Insulation characteristics
Overvoltage category	II
Degree of pollution	2

Rated insulation voltage	60 V (In accordance with EN/IEC 60079-7)
Maximum power dissipation for nominal condition	1.56 W
Transient surge protection	Yes
System limits
Number of supported devices	≤ 99 (Addressing via thumbwheel)
Number of possible extension modules	≤ 32 (Per module)
Supply
Supply voltage range	19.2 V DC ... 30.5 V DC
Max. current consumption	≤ 65 mA (at 24 V DC, at 25 °C, stand-alone)
Max. current consumption		≤ 6 A (at 24 V DC, with DIN rail connector at full capacity)

Digital
Output name	Link relay output
Number of outputs	1
Contact type	Changeover contact
Contact material	PdRu, gold-plated
Maximum switching voltage	30 V AC/DC
Maximum switching voltage		60 V DC
Max. switching current	500 mA (30 V AC/DC)
Max. switching current		300 mA (60 V DC)
Electrical service life	5x 10⁵ switching cycles with 0.5 A at 30 V DC

Tightening torque	0.5 Nm ... 0.6 Nm
Tightening torque		5 lb_f-in. ... 7 lb_f-in.
Connection method	Screw connection
Stripping length	7 mm
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	14

Serial: RS-485
Data rate	300 bps / 600 bps / 1.2 kbps / 2.4 kbps / 4.8 kbps / 9.6 kbps / 19.2 kbps / 38.4 kbps / 57.6 kbps / 93.75 kbps / 115.2 kbps (Default setting: 19.2/8/E/1)
Connection method	COMBICON plug-in screw terminal block
Connection technology	2-conductor
Transmission length	≤ 1200 m
Termination resistor	390 Ω (switchable via DIP switches)
		150 Ω (switchable via DIP switches)
		390 Ω (switchable via DIP switches)
Serial: Configuration interface
Connection method	S-PORT (socket)

Status display	Green LED (supply voltage, PWR)
		Green LED (bus communication, DAT)
		Red LED (periphery error, ERR)
		Green LED (receive data, RX)
		Green LED (transmit data, TX)

Dimensional drawing
Width	17.5 mm
Height	113 mm
Depth	114.5 mm

Material Housing	PA 6.6-FR
Flammability rating according to UL 94	V0

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C (>55°C derating, see technical documentation)
Ambient temperature (operation)		-40 °F ... 158 °F (>131°F derating, see technical documentation)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Ambient temperature (storage/transport)		-40 °F ... 185 °F
Altitude	2000 m
Permissible humidity (operation)	20 % ... 85 %
Permissible humidity (storage/transport)	20 % ... 85 %
Shock	16g, 11 ms
Vibration (operation)	in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz

CE
Certificate	CE-compliant
UKCA
Certificate	UKCA-compliant
ATEX
Identification	 II 3 G Ex ec nC IIC T4 Gc
Certificate	IBExU 15 ATEX B008 X
Note	Please follow the special installation instructions in the documentation!
IECEx
Identification	Ex ec nC IIC T4 Gc
Certificate	IECEx IBE 13.0019X
EAC Ex
Identification	2Ex nA nC IIC T4 Gc X
Certificate	RU C-DE.HB49.B.00033/20
UL, USA/Canada
Identification	508 Listed
		Class I, Div. 2, Groups A, B, C, D T4A
		Class I, Zone 2, IIC T4
Corrosive gas test
Identification	ISA-S71.04-1985 G3 Harsh Group A