RAD-DAIO6-IFS - I/O extension module Phoenix Contact

Mã sản phẩm: 2901533

Danh mục: PHOENIX CONTACT, Tự động hóa Phoenix Contact,

Radioline - I/O extension module, 2 digital inputs and outputs (0 ... 250 V AC/DC) and 1 analog input (0/4 ... 20 mA) and output (0/4 ... 20 mA, 0 ... 10 V)

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	Extension module
MTTF	889 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
		391 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
		151 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
Insulation characteristics
Overvoltage category	II
Degree of pollution	2

Electrical isolation	300 V (Rated insulation voltage (in each case between the digital inputs // digital outputs // TBUS supply, reinforced insulation in accordance with EN/IEC 61010))
		50 V (Rated insulation voltage (in each case between the analog inputs / analog outputs / TBUS supply, reinforced insulation in accordance with EN/IEC 61010))
		300 V (Rated insulation voltage (in each case between the digital inputs and outputs // analog inputs and outputs, reinforced insulation in accordance with EN/IEC 61010))
		300 V (Rated insulation voltage (to adjacent devices, basic insulation in accordance with EN/IEC 61010))
Test voltage for digital I/Os	2.5 kV AC (50 Hz, 1 min.)
Test voltage for analog I/Os	1.5 kV AC (50 Hz, 1 min.)
Maximum power dissipation for nominal condition	2.28 W
Transient surge protection	Yes
Supply
Supply voltage range	19.2 V DC ... 30.5 V DC (DIN rail connector)
Max. current consumption	≤ 95 mA (At 24 V DC, at 25°C)

Digital
Max. current consumption	< 1 mA
Analog
Description of the input	Analog input
Number of inputs	1
Current input signal	0 mA ... 20 mA (can be set via DIP switches)
Current input signal		4 mA ... 20 mA (can be set via DIP switches)
Max. current input signal	22 mA
Input resistance current input	< 70 Ω
Resolution	16 bit
Precision	≤ 0.02 % (at 25 °C)
Protective circuit	Short-circuit and overload protection
Temperature coefficient, typical	typ. 0.0025 %/K (at -40 °C ... +70 °C)
Supply voltage	12 V DC (U_ANA via terminal block PWR1, +I1, for passive sensors, 25 mA)
Digital
Description of the input	Digital input
Number of inputs	2
Voltage input signal	0 V AC/DC ... 250 V AC/DC
Switching level "0" signal	0 V AC/DC ... 4 V AC/DC (Low-voltage input)
Switching level "0" signal		0 V AC/DC ... 20 V AC/DC (High-voltage input)
Switching level "1" signal	10 V AC/DC ... 50 V AC/DC (Low-voltage input)
Switching level "1" signal		50 V AC/DC ... 250 V AC/DC (High-voltage input)
Input frequency	≤ 2 Hz

Digital
Output name	Relay output
Number of outputs	2
Contact type	Changeover contact
Contact material	AgSnO₂
Maximum switching voltage	250 V AC/DC
Min. switching current	≥ 10 mA
Max. switching current	2 A (250 V AC)
		0.168 A (250 V DC)
		2 A (24 V DC)
Mechanical service life	1x 10⁷cycles
Electrical service life	2x 10⁵ cycles (At 2 A, 250 V AC, cosφ 0.4)
Electrical service life		2x 10⁵ cycles (At 1 A, 24 V DC, L/R = 48 ms)
Maximum switching frequency	2 Hz
Behavior of the outputs (adjustable via DIP switch)	Hold / Reset
Analog
Output name	Analog output
Number of outputs	1
Voltage output signal	0 V ... 10 V
Max. voltage output signal	~ 10.83 V
Current output signal	0 mA ... 20 mA
Current output signal		4 mA ... 20 mA
Max. current output signal	~ 21.67 mA
Load	≥ 10 kΩ
Load		≤ 500 Ω
Resolution	16 bit
Precision	≤ 0.02 % (at 25 °C)
Precision		typ. 0.5 % (Voltage output)
Temperature coefficient, typical	typ. 0.0025 %/K (at -40 °C ... +70 °C)
Protective circuit	Transient protection of outputs

Tightening torque	0.5 Nm ... 0.6 Nm
Tightening torque		5 lb_f-in. ... 7 lb_f-in.
Connection method	Screw connection
Stripping length	7 mm
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	14

Status display	Green LED (supply voltage, PWR)
		Green LED (bus communication, DAT)
		Red LED (periphery error, ERR)
		Yellow LED (digital input, DI1)
		Yellow LED (digital input, DI2)
		Yellow LED (digital output, DO1)
		Yellow LED (digital output, DO2)

Dimensional drawing
Width	17.5 mm
Height	113 mm
Depth	114.5 mm

Material Housing	PA 6.6-FR
Flammability rating according to UL 94	V0

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C (>55°C derating, see technical documentation)
Ambient temperature (operation)		-40 °F ... 158 °F (>131°F derating, see technical documentation)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Ambient temperature (storage/transport)		-40 °F ... 185 °F
Altitude	2000 m
Permissible humidity (operation)	20 % ... 85 %
Permissible humidity (storage/transport)	20 % ... 85 %
Shock	16g, 11 ms
Vibration (operation)	in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz

CE
Certificate	CE-compliant
UKCA
Certificate	UKCA-compliant
ATEX
Identification	 II 3 G Ex ec nC IIC T4 Gc
Certificate	IBExU 15 ATEX B008 X
Note	Please follow the special installation instructions in the documentation!
IECEx
Identification	Ex ec nC IIC T4 Gc
Certificate	IECEx IBE 13.0019X
EAC Ex
Identification	2Ex nA nC IIC T4 Gc X
Certificate	RU C-DE.HB49.B.00033/20
UL, USA/Canada
Identification	508 Listed
		Class I, Div. 2, Groups A, B, C, D T4A
		Class I, Zone 2, IIC T4
CCC / China-Ex
Identification	Ex ec nC IIC T4 Gc
Certificate	2022122310115625
KC approval for South Korea
Certificate	R-R-PCK-2901533
Corrosive gas test
Identification	ISA-S71.04-1985 G3 Harsh Group A