QUINT4-UPS/24DC/24DC/5/EIP - Uninterruptible power supply Phoenix Contact

Mã sản phẩm: 2906994

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

QUINT USV, IQ Technology, EtherNet/IP (Modbus/TCP), DIN rail mounting, Screw connection, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Input voltage	24 V DC
Input voltage range	18 V DC ... 30 V DC
Input voltage range		18 V DC ... 32 V DC
Electric strength, max.	35 V DC (Protected against polarity reversal)
Internal input fuse	no
Voltage type of supply voltage	DC
Inrush current	≤ 7 A (≤ 4 ms)
Reverse polarity protection	yes
Fixed backup threshold	22 V DC
Dynamic activation threshold	> 1 V / 100 ms
Switch-on time	max. 3 s
Switch-on time during battery operation (Bat.-Start)	8 s
Voltage drop, input/output	0.3 V DC
Current consumption I_N (U_N, I_OUT = I_N, I_charge = 0)	5.1 A
Current consumption I_max (U_N, I_OUT = I_Stat.Boost, I_{charge = max})	8.3 A
Current consumption I_No-Load(U_N, I_OUT = 0, I_charge = 0)	105 mA
Current consumption I_charge (U_N, I_OUT = 0, I_charge = max)	1.9 A
Power consumption P_N (U_N, I_OUT = I_N, I_charge = 0)	123 W
Power consumption P_max (U_N, I_OUT = I_Stat.Boost, I_charge = max)	213 W
Power consumption P_No-Load (U_N, I_OUT = 0, I_charge = 0)	2.5 W
Power consumption P_charge (U_N, I_OUT = 0, I_charge = max)	44 W

Efficiency	typ. 97 %
Number of outputs	1
Short-circuit-proof	yes
No-load proof	yes
Switch-over time	0 ms
UPS connection in parallel	no
UPS connection in series	no
Energy storage device connection in parallel	Yes, 5 (observe line protection)
Energy storage device connection in series	no
Mains operation
Output voltage	24 V DC (U_OUT = U_IN - 0.3 V DC)
Output voltage range	18 V DC ... 30 V DC (U_Out = U_In - 0.3 V DC)
Output voltage range		18 V DC ... 32 V DC
Output current I_N	5 A
Static Boost (I_Stat.Boost)	6.25 A
Dynamic Boost (I_Dyn.Boost)	10 A (5 s)
Selective Fuse Breaking (I_SFB)	30 A (15 ms)
Output power P_OUT (U_N, I_OUT = I_N)	120 W
Output power P_OUT (U_N, I_OUT = I_stat.Boost)	155 W
Output power P_OUT (U_N, I_OUT = I_dyn.Boost)	240 W (5 s)
Power dissipation No load (U_N, I_Out = 0, I_Charge = 0)	3 W
Power dissipation Nominal load (U_N, I_Out = I_N, I_Charge = 0)	4 W
Battery operation
Output voltage	24 V DC (U_OUT = U_BAT - 0.3 V DC)
Output voltage range	19 V DC ... 32 V DC (U_OUT = U_BAT - 0.3 V DC)
Output current I_N	5 A
Static Boost (I_Stat.Boost)	6.25 A
Dynamic Boost (I_Dyn.Boost)	10 A (5 s)
Selective Fuse Breaking (I_SFB)	30 A (15 ms)
Output power P_OUT (U_N, I_OUT = I_N)	120 W
Output power P_OUT (U_N, I_OUT = I_stat.Boost)	150 W
Output power P_OUT (U_N, I_OUT = I_dyn.Boost)	240 W (5 s)

End-of-charge voltage	32 V DC
End-of-charge voltage (temperature-compensated)	25 V DC ... 32 V DC
Charging current (configurable)	max. 1.5 A
Nominal capacity (without additional charger)	0.8 Ah ... 30 Ah
Max. capacity	40 Ah
Charging time	2.5 h (3.4 Ah)
Buffer time	25 min. (3.4 Ah)
Deep discharge protection (configurable)	19.2 V DC
Battery technology	VRLA, VRLA-WTR, LI-ION
Charge characteristic curve	IU₀U
IQ-Technology	yes
Temperature sensor	yes
Temperature compensation (configurable)	42 mV/K

Interface	EtherNet/IP (Modbus/TCP)
Number of interfaces	2
Connection method	RJ45
Locking	Locking clip
Transmission physics	Twisted-Pair
Features	Autonegotiation
		Autocrossing
		Half- or full-duplex
		automatic recognition
		Optional: manually adjustable
Topology	Star
Topology		Line
Transmission speed	10 Mbps ... 100 Mbps
Transmission length	max. 100 m
Cycle time	30 ms (Default)
Access time	≤ 2 s
Supported protocols	EtherNet/IP^(Explicit Messaging, Implicit Messaging)
		BootP
		DHCP
		DLR
		Modbus/TCP
		HTTPS (Webserver)
Chipset	Renesas R-IN32M3
Electrical isolation	yes
Device ID	1FF4_hex
Vendor ID	232hex
IP address	192.168.019.023 (configurable)

Types of signaling	DC OK (green)
		Alarm (red)
		Bat.-Mode (yellow)
		SOC (red, green)
		Data (red, green)

Product type	DC UPS
Product family	QUINT USV
MTBF (IEC 61709, SN 29500)	> 1189000 h (25 °C)
		> 736900 h (40 °C)
		> 372700 h (60 °C)
Environmental protection directive	RoHS Directive 2011/65/EU
		WEEE
		Reach
Insulation characteristics
Protection class	III (without PE)
Degree of pollution	2
Life expectancy (electrolytic capacitors)
Time	224011 h

Width	35 mm
Height	130 mm
Depth	125 mm
Installation dimensions
Installation distance right/left (active)	5 mm / 5 mm (P_Out ≥50% )
Installation distance right/left (passive)	0 mm / 0 mm (P_Out ≥50% )
Installation distance right/left (active, passive)	0 mm / 0 mm (P_Out ≤50 %)
Installation distance top/bottom (active)	50 mm / 50 mm (P_Out ≥50% )
Installation distance top/bottom (passive)	40 mm / 20 mm (P_Out ≥50% )
Installation distance top/bottom (active, passive)	40 mm / 20 mm (P_Out ≤50 %)
Alternative assembly
Width	123 mm
Height	130 mm
Depth	37 mm

Mounting type	DIN rail mounting
Mounting position	On horizontal DIN rail NS 35/7.5 and NS 35/15 acc. to EN 60715

Flammability rating according to UL 94 (housing / terminal blocks)	V0
Housing material	Metal
Hood version	Stainless steel X6Cr17
Side element version	Aluminum AlMg3

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Ambient temperature (start-up type tested)	-40 °C
Maximum altitude	≤ 4000 m
Climatic class	3K3 (EN 60721)
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Shock	18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)	2.3g

Overvoltage category
EN 61010-1	II (≤ 4000 m)
EN 61010-2-201	II (≤ 4000 m)
Protective extra-low voltage
Standards/specifications	IEC 61010-1 (SELV)
		IEC 61010-2-201 (PELV)

UL
Identification	UL/C-UL Listed UL 61010-1
UL
Identification	UL/C-UL Listed UL 61010-2-201
UL
Identification	UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
CSA
Identification	CAN/CSA-C22.2 No. 61010-1-12
CSA
Identification	CAN/CSA-IEC 61010-2-201
CSA
Identification	CAN/CSA-C22.2 No. 213 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
CB scheme
Identification	IEC 61010-1
CB scheme
Identification	IEC 61010-2-201
DNV
Identification	Class Guideline DNVGL-CG-0339
Note	Location classes: Temperature D (see Application/Limitation), Humidity B, Vibration A/C, EMC B

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
EMC requirements for noise emission	EN 61000-6-3
EMC requirements for noise emission		EN 61000-6-4
EMC requirements for noise immunity	EN 61000-6-1
EMC requirements for noise immunity		EN 61000-6-2
Noise immunity	Immunity in accordance with EN 61000-6-1 (residential), EN 61000-6-2 (industrial), and EN 61000-6-5 (power station equipment zone), IEC/EN 61850-3 (power supply)
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Noise emission	Additional basic standard EN 61000-6-5 (immunity in power station), IEC/EN 61850-3 (energy supply)
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	8 kV (Test Level 4)
Discharge in air	15 kV (Test Level 4)
Comments	Criterion B
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 1 GHz
Test field strength	20 V/m (Test Level 3)
Frequency range	1 GHz ... 6 GHz
Test field strength	10 V/m (Test Level 3)
Frequency range	1 GHz ... 6 GHz
Test field strength	10 V/m (Test Level 3)
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	4 kV (Test Level 4 - asymmetrical)
Output	4 kV (Test Level 4 - asymmetrical)
Signal	4 kV (Test Level 4 - asymmetrical)
Comments	Criterion B
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Input	1 kV (Test Level 3 - symmetrical)
Input		2 kV (Test Level 3 - asymmetrical)
Output	1 kV (Test Level 3 - symmetrical)
Output		2 kV (Test Level 3 - asymmetrical)
Signal	1 kV (Test Level 2 - asymmetrical)
Comments	Criterion B
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
I/O/S	asymmetrical
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V (Test Level 3)
Power frequency magnetic field
Standards/regulations	EN 61000-4-8
Frequency	16.67 Hz
		50 Hz
		60 Hz
Test field strength	100 A/m
Additional text	60 s
Comments	Criterion A
Frequency	50 Hz
Frequency		60 Hz
Frequency range	50 Hz ... 60 Hz
Test field strength	1 kA/m
Additional text	3 s
Frequency	0 Hz
Test field strength	300 A/m
Additional text	DC, 60 s
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.