QUINT4-UPS/24DC/24DC/20 - Uninterruptible power supply Phoenix Contact

Mã sản phẩm: 2907071

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

QUINT USV, IQ Technology, DIN rail mounting, Screw connection, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Input voltage	24 V DC
Input voltage range	18 V DC ... 30 V DC
Electric strength, max.	35 V DC (Protected against polarity reversal)
Internal input fuse	no
Typical national grid voltage	24 V DC
Voltage type of supply voltage	DC
Inrush current	≤ 8 A (≤ 4 ms)
Reverse polarity protection	yes
Fixed backup threshold	22 V DC
Fixed backup threshold		30 V DC
Dynamic activation threshold	> 1 V / 100 ms
Switch-on time	max. 3 s
Switch-on time during battery operation (Bat.-Start)	8 s
Voltage drop, input/output	0.4 V DC
Current consumption I_N (U_N, I_OUT = I_N, I_charge = 0)	20.1 A
Current consumption I_max (U_N, I_OUT = I_Stat.Boost, I_{charge = max})	31.4 A
Current consumption I_No-Load(U_N, I_OUT = 0, I_charge = 0)	50 mA
Current consumption I_charge (U_N, I_OUT = 0, I_charge = max)	6.1 A
Power consumption P_N (U_N, I_OUT = I_N, I_charge = 0)	474 W
Power consumption P_max (U_N, I_OUT = I_Stat.Boost, I_charge = max)	738 W
Power consumption P_No-Load (U_N, I_OUT = 0, I_charge = 0)	1.3 W
Power consumption P_charge (U_N, I_OUT = 0, I_charge = max)	145 W
Signal state Bat.-Start
Connection labeling	3.8 (+)
Channel	DI (digital input)
State	Bat.-Mode
State condition	Low level (30 ms)
Low signal	Input connected with SGnd (3.9) or Bat
High signal	Input not connected or connected with >U_Bat
Signal - state assignment	low - active
Reference potential	3.9 (SGnd, identical to 1.2, 2.2, 4.2)
LED status indicator	Yellow (Bat.-Mode)
Signal state PS Boost
Connection labeling	3.7 (+)
Channel (configurable)	DI (digital input) default, AI (analog input)
State (configurable)	Charging current reduced
State condition	Low level
Low signal	Input connected with SGnd (3.9), <5 V DC or not connected
High signal	Input connected with 13 … 30 V DC
Signal - state assignment	low - active
Analog	4 mA ... 20 mA (Offset zero point)
Unit signal	I (mA)
Load	390 Ω
Reference potential	3.9 (SGnd, identical to 1.2, 2.2, 4.2)
Signal state Remote
Connection labeling	3.6 (+)
Channel	DI (digital input)
State (configurable)	Disconnection
State condition	Low level
Low signal	Input connected with SGnd (3.9) or <5 V DC
High signal	Input not connected or connected with 13 … 30 V DC
Signal - state assignment	low - active
Reference potential	3.9 (SGnd, identical to 1.2, 2.2, 4.2)
LED status indicator	Green, flashing (DC OK)

Efficiency	typ. 98 %
Number of outputs	1
Short-circuit-proof	yes
No-load proof	yes
Switch-over time	0 ms
UPS connection in parallel	no
UPS connection in series	no
Energy storage device connection in parallel	Yes, 5 (observe line protection)
Energy storage device connection in series	no
Mains operation
Output voltage	24 V DC (U_OUT = U_IN - 0.4 V DC)
Output voltage range	18 V DC ... 30 V DC (U_OUT = U_IN - 0.4 V DC)
Output voltage range		18 V DC ... 32 V DC
Output current I_N	20 A
Static Boost (I_Stat.Boost)	25 A
Dynamic Boost (I_Dyn.Boost)	30 A (5 s)
Selective Fuse Breaking (I_SFB)	120 A (15 ms)
Output power P_OUT (U_N, I_OUT = I_N)	480 W
Output power P_OUT (U_N, I_OUT = I_stat.Boost)	600 W
Output power P_OUT (U_N, I_OUT = I_dyn.Boost)	720 W (5 s)
Power dissipation No load (U_N, I_Out = 0, I_Charge = 0)	3 W
Power dissipation Nominal load (U_N, I_Out = I_N, I_Charge = 0)	10 W
Battery operation
Output voltage	24 V DC (U_OUT = U_BAT - 0.4 V DC)
Output voltage range	19 V DC ... 28 V DC (U_OUT = U_BAT - 0.4 V DC)
Output current I_N	20 A
Static Boost (I_Stat.Boost)	25 A
Dynamic Boost (I_Dyn.Boost)	30 A (5 s)
Selective Fuse Breaking (I_SFB)	120 A (15 ms)
Output power P_OUT (U_N, I_OUT = I_N)	480 W
Output power P_OUT (U_N, I_OUT = I_stat.Boost)	600 W
Output power P_OUT (U_N, I_OUT = I_dyn.Boost)	720 W (5 s)
Power dissipation No load (U_N, I_Out = 0, I_Charge = 0)	2 W
Power dissipation Nominal load (U_N, I_Out = I_N, I_Charge = 0)	11 W
Signal supply 24 V DC, 20 mA, SGnd
Connection labeling	3.1 (+), 3.9 (SGnd)
Output voltage	24 V DC
Output can be loaded	max. 20 mA
Reference potential	3.9 (SGnd, identical to 1.2, 2.2, 4.2)
Signal state Alarm
Connection labeling	3.2, 3.3
Channel	DO (digital output)
Switching voltage	max. 30 V AC/DC
Switch contact (floating)	OptoMOS
State (configurable)	Group alarm
State condition (configurable)	Alarm threshold
Current carrying capacity	max. 100 mA
State - signal assignment	NC (Normally Closed)
LED status indicator	red (Alarm)
Signal state Bat. mode
Connection labeling	3.4 (+)
Channel	DO (digital output)
Semiconductor output	MOSFET
State (configurable)	Bat.-Mode
State condition (configurable)	U_IN < 18 V DC, U_IN > 30 V DC, Bat.-Start
Output voltage	19 V DC ... 28 V DC (buffered)
Output can be loaded	max. 20 mA
State - signal assignment	active - high
Reference potential	3.9 (SGnd, identical to 1.2, 2.2, 4.2)
LED status indicator	Yellow (Bat.-Mode)
Signal state Ready
Connection labeling	3.5 (+)
Channel	DO (digital output)
Semiconductor output	MOSFET
State (configurable)	Ready
State condition (configurable)	SOC = 100 %
Output voltage	19 V DC ... 28 V DC (buffered)
Output can be loaded	max. 20 mA
State - signal assignment	active - high
Reference potential	3.9 (SGnd, identical to 1.2, 2.2, 4.2)
LED status indicator	Green (state of charge - SOC)

Nominal voltage U_N	24 V DC
End-of-charge voltage (temperature-compensated)	25 V DC ... 32 V DC
End-of-charge voltage (configurable)	27.6 V DC
Charging current (configurable)	max. 5 A
Nominal capacity (without additional charger)	3 Ah ... 135 Ah
Max. capacity	135 Ah
Charging time	165 min. (12 Ah)
Buffer time	22 min. (12 Ah)
Deep discharge protection (configurable)	19.2 V DC
Battery technology	VRLA, VRLA-WTR, LI-ION
Charge characteristic curve	IU₀U
IQ-Technology	yes
Temperature sensor	yes
Temperature compensation (configurable)	42 mV/K

Types of signaling	DC OK (green)
		Alarm (red)
		Bat.-Mode (yellow)
		SOC (red, green)
		Data (red, green)

Product type	DC UPS
Product family	QUINT USV
MTBF (IEC 61709, SN 29500)	> 1940000 h (25 °C)
		> 1157000 h (40 °C)
		> 568100 h (60 °C)
Environmental protection directive	RoHS Directive 2011/65/EU
		WEEE
		Reach
Insulation characteristics
Protection class	III (without PE)
Degree of pollution	2
Life expectancy (electrolytic capacitors)
Time	192072 h

Width	40 mm
Height	130 mm
Depth	125 mm
Installation dimensions
Installation distance right/left (active)	5 mm / 5 mm (P_Out ≥50% )
Installation distance right/left (passive)	0 mm / 0 mm (P_Out ≥50% )
Installation distance right/left (active, passive)	0 mm / 0 mm (P_Out ≤50 %)
Installation distance top/bottom (active)	50 mm / 50 mm (P_Out ≥50% )
Installation distance top/bottom (passive)	40 mm / 20 mm (P_Out ≥50% )
Installation distance top/bottom (active, passive)	40 mm / 20 mm (P_Out ≤50 %)
Alternative assembly
Width	123 mm
Height	130 mm
Depth	42 mm

Mounting type	DIN rail mounting
Mounting position	On horizontal DIN rail NS 35/7.5 and NS 35/15 acc. to EN 60715

Flammability rating according to UL 94 (housing / terminal blocks)	V0
Housing material	Metal
Hood version	Stainless steel X6Cr17
Side element version	Aluminum AlMg3

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Ambient temperature (start-up type tested)	-40 °C
Maximum altitude	≤ 4000 m
Climatic class	3K3 (EN 60721)
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Shock	18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)	2.3g

Overvoltage category
EN 61010-1	II (≤ 4000 m)
EN 61010-2-201	II (≤ 4000 m)
Protective extra-low voltage
Standards/specifications	IEC 61010-1 (SELV)
		IEC 61010-2-201 (PELV)

UL approval
Identification	UL/C-UL Listed UL 61010-1
UL approval
Identification	UL/C-UL Listed UL 61010-2-201
UL approval
Identification	UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
CSA
Identification	CAN/CSA-C22.2 No. 61010-1-12
CSA
Identification	CAN/CSA-IEC 61010-2-201
CSA
Identification	CAN/CSA-C22.2 No. 213 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
CB scheme
Identification	IEC 61010-1
		IEC 61010-2-201
DNV
Identification	Class Guideline DNVGL-CG-0339
Note	Location classes: Temperature D (see Application/Limitation), Humidity B, Vibration A/C, EMC B

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
EMC requirements for noise emission	EN 61000-6-3
EMC requirements for noise emission		EN 61000-6-4
EMC requirements for noise immunity	EN 61000-6-1
EMC requirements for noise immunity		EN 61000-6-2
Noise immunity	Immunity in accordance with EN 61000-6-1 (residential), EN 61000-6-2 (industrial), and EN 61000-6-5 (power station equipment zone), IEC/EN 61850-3 (power supply)
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Noise emission	Additional basic standard EN 61000-6-5 (immunity in power station), IEC/EN 61850-3 (energy supply)
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	8 kV (Test Level 4)
Discharge in air	15 kV (Test Level 4)
Comments	Criterion B
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 1 GHz
Test field strength	20 V/m (Test Level 3)
Frequency range	1 GHz ... 6 GHz
Test field strength	10 V/m (Test Level 3)
Frequency range	1 GHz ... 6 GHz
Test field strength	10 V/m (Test Level 3)
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	4 kV (Test Level 4 - asymmetrical)
Output	4 kV (Test Level 4 - asymmetrical)
Signal	4 kV (Test Level 4 - asymmetrical)
Comments	Criterion B
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Input	1 kV (Test Level 3 - symmetrical)
Input		2 kV (Test Level 3 - asymmetrical)
Output	1 kV (Test Level 3 - symmetrical)
Output		2 kV (Test Level 3 - asymmetrical)
Signal	1 kV (Test Level 2 - asymmetrical)
Comments	Criterion B
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
I/O/S	asymmetrical
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V (Test Level 3)
Power frequency magnetic field
Standards/regulations	EN 61000-4-8
Frequency	16.67 Hz
		50 Hz
		60 Hz
Test field strength	100 A/m
Additional text	60 s
Comments	Criterion A
Frequency	50 Hz
Frequency		60 Hz
Frequency range	50 Hz ... 60 Hz
Test field strength	1 kA/m
Additional text	3 s
Frequency	0 Hz
Test field strength	300 A/m
Additional text	DC, 60 s
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.