QUINT4-UPS/1AC/1AC/500VA/USB - Uninterruptible power supply Phoenix Contact

Mã sản phẩm: 1067327

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

QUINT AC-USV, IQ Technology, DIN rail mounting, input: 120 V AC / 230 V AC, output: 120 V AC / 230 V AC / 500 VA.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Input voltage	120 V AC
Input voltage		230 V AC
Input voltage range	90 V AC ... 264 V AC
Nominal input voltage range	100 V AC ... 240 V AC
Typical national grid voltage	120 V AC
Voltage type of supply voltage	AC
Frequency range (f_N)	45 Hz ... 65 Hz
Permissible backup fuse	max. 25 A
Current consumption	6.9 A (100 V AC)
		2.86 A (240 V AC)
		19 A (24 V DC)
Signal Bat.-Start
Connection labeling	3.6, 3.7
Signalization designation	Bat.-Start
Low signal	Connection to SGnd with < 2.7 kΩ
High signal	Open (> 200 kΩ between Bat.-Start and SGnd)
Signal Remote
Connection labeling	3.8
Signalization designation	Remote
Low signal	Connection to SGnd with < 2.7 kΩ
High signal	Open (> 35 kΩ between Remote and SGnd)

Efficiency	> 97 % (100 % load, with charged energy storage)
Efficiency		~ 87 % (100 % load )
Apparent power	500 VA
Real power	400 W
Power factor (cos phi)	0.8
Crest factor	2.8
Switch-over time	< 10 ms
UPS classification	VFD-SS-311
Connection in parallel	no
Connection in series	No
Overload capability Mains operation	in accordance with internal fuse
Overload capability Battery operation	105 % (Permanent)
Overload capability Battery operation		120 % ... 150 % (20 s / 5 s, then shutdown)
Mains operation
Output voltage	120 V AC
Output voltage		230 V AC
Nominal output current (I_N)	4.17 A (120 V AC)
Nominal output current (I_N)		2.17 A (230 V AC)
Maximum no-load power dissipation	typ. 9 W (120 V AC)
Maximum no-load power dissipation		typ. 10 W (230 V AC)
Power loss nominal load max.	typ. 10 W (120 V AC)
Power loss nominal load max.		typ. 11 W (230 V AC)
Nominal output frequency	60 Hz ±5 Hz
Nominal output frequency		50 Hz ±5 Hz
Output fuse	10 A 400 V gRL
Battery operation
Output voltage	120 V AC ±2 %
Output voltage		230 V AC ±2 %
Form of output voltage	Pure sine
Maximum no-load power dissipation	approx. 23 W (120 V AC)
Maximum no-load power dissipation		approx. 24 W (230 V AC)
Power loss nominal load max.	approx. 57 W (120 V AC)
Power loss nominal load max.		approx. 54 W (230 V AC)
Nominal output frequency	60 Hz
		50 Hz
		±5 % (grid-guided)
		±0.5 % (self-guided)
Total harmonic distortion factor (THD)	< 3 % (linear load)
Total harmonic distortion factor (THD)		< 8 % (non-linear load)
Electronic current limitation	> 2,5 x I_N (> 200 ms)
Signal AC OK
Connection labeling	3.3
Signalization designation	AC OK
Type of signaling	Green LED
Switching output	Transistor output, active
Output voltage	24 V
Continuous load current	≤ 20 mA
LED status indicator	green
Signal Alarm
Connection labeling	3.1
Signalization designation	Alarm
Type of signaling	LED red
Switching output	Transistor output, active
Output voltage	24 V
Continuous load current	≤ 20 mA
LED status indicator	red
Signal Battery mode
Connection labeling	3.2
Signalization designation	Battery mode
Type of signaling	Yellow LED
Switching output	Transistor output, active
Output voltage	24 V
Continuous load current	≤ 20 mA
LED status indicator	yellow
Signal P>P_n
Connection labeling	3.5
Signalization designation	P>P_n
Switching output	Transistor output, active
Output voltage	24 V
Continuous load current	≤ 20 mA
Signal Ready
Connection labeling	3.4
Signalization designation	Ready
Type of signaling	Green LED
Switching output	Transistor output, active
Output voltage	24 V
Continuous load current	≤ 20 mA
LED status indicator	green
Signal ground SGnd
Connection labeling	3.9
Function	Signal ground
Reference potential	For signal inputs and signal outputs

Input voltage	24 V DC
End-of-charge voltage	24 V DC ... 31 V DC (temperature compensated)
Charging current	max. 5 A
Nominal capacity range	3.4 Ah ... 200 Ah (5x 40 Ah)
Deep discharge protection	20 V DC ... 24 V DC (can be parameterized)
Battery technology	VRLA, VRLA-WTR, LI-ION (see section: Ordering data)
Charge characteristic curve	IU₀U

Interface	USB (Modbus/RTU)
Number of interfaces	1
Connection method	MINI-USB Type B
Connection marking	5.1
Locking	Screw
Transmission physics	USB 2.0
Maximum cable length	3 m
Electrical isolation	yes

Number of phases

1.00

Product type	AC UPS
Product family	QUINT AC-USV
MTBF (IEC 61709, SN 29500)	445469 h (40 °C)
Insulation characteristics
Protection class	I
Overvoltage category	II
Pollution degree	3 (≤ 130 V AC)
Pollution degree		2 (> 200 V AC)

Width	180 mm
Height	130 mm
Depth	125 mm
Installation dimensions
Installation distance right/left	0 mm / 0 mm
Installation distance top/bottom	50 mm / 50 mm

Mounting type

DIN rail mounting

Housing material

Metal

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 60 °C (> 50 °C: 2,5 % / K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 3000 m (> 2000 m: 0,6 % / 100 m)
Max. permissible relative humidity (operation)	≤ 95 %
Shock	20g in all directions (EN 60068-2-27)
Vibration (operation)	5 Hz ... 100 Hz, 0.7g (EN 60068-2-6)

Uninterruptible power supply systems
Standards/specifications	EN 62040-1

UL
Identification	UL/C-UL Recognized UL 1778

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Interference emission	Noise emission in accordance with EN 62040-2
Noise immunity	Immunity in accordance with EN 62040-2
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Conducted noise emission	EN 62040-02 (Class C2)
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	± 6 kV
Discharge in air	± 8 kV
Comments	Criterion A
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 6 GHz
Test field strength	10 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	± 2 kV
Input		± 2 kV
Output	± 2 kV
Signal	± 2 kV
Signal		± 2 kV (USB)
Comments	Criterion A (B for USB)
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Signal	1 kV (asymmetrical)
Comments	Criterion A
Input/Output	± 1 kV (symmetrical)
Input/Output		± 2 kV (asymmetrical)
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz
Signal	1 kV (asymmetrical)
Comments	Criterion A
Power frequency magnetic field
Standards/regulations	EN 61000-4-8
Frequency	50 Hz
Signal	30 A/m
Comments	Criterion A
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.