QUINT4-UPS/1AC/1AC/1KVA - Uninterruptible power supply Phoenix Contact

Mã sản phẩm: 2320283

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Uninterruptible power supply with IQ technology for DIN rail mounting. Input: 120/230 V AC, output: 120/230 V AC/1 kVA. Provides information regarding the state of charge, remaining runtime, and service life of the rechargeable battery module at any time, thereby increasing system availability.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

AC operation
Input voltage	100 V AC -10 % / +20 %
		110 V AC -10 % / +20 %
		120 V AC -10 % / +20 %
		130 V AC -10 % / +20 %
		200 V AC -20 % / +20 %
		210 V AC -20 % / +20 %
		220 V AC -20 % / +20 %
		230 V AC -20 % / +15 %
		240 V AC -20 % / +10 %
Input voltage range	90 V AC ... 264 V AC
Input voltage range AC	184 V AC ... 264 V AC
Input voltage range AC		96 V AC ... 144 V AC
Typical national grid voltage	120 V AC
Typical national grid voltage		230 V AC
Voltage type of supply voltage	AC
AC frequency range	45 Hz ... 65 Hz
Buffer period	1 h (38 AH)
Current consumption	10.4 A (100 V AC)
		10.5 A (110 V AC)
		10.5 A (120 V AC)
		9.7 A (130 V AC)
		6.4 A (200 V AC)
		6 A (210 V AC)
		5.7 A (220 V AC)
		5.5 A (230 V AC)
		5.3 A (240 V AC)
Variable connect threshold	Can be configured using UPS-CONF software
Power factor (cos phi)	0.9
Bypass fuse	T 15 A / 250 V (MDA -15-R)
Permissible backup fuse	B16 230 V AC
Permissible backup fuse		20 A (120 V AC, Listed breaker)
Digital Control (configurable)
Designation	Remote
Low signal	Connection to SGnd with < 2.7 kΩ
High signal	Open (> 35 kΩ between Remote and SGnd)
Digital Control Low-Active (configurable)
Battery-operated start 120 V AC low signal	Connection to SGnd with < 2.7 kΩ
Battery-operated start 120 V AC high signal	Open (> 200 kΩ between Bat.-Start and SGnd)

Classification according to IEC 62040-3	VFI-SS-111
Efficiency	> 92 % (120 V AC)
Efficiency		> 94 % (230 V AC)
Nominal output voltage	100 V AC
		110 V AC
		120 V AC
		130 V AC
		200 V AC
		210 V AC
		220 V AC
		230 V AC
		240 V AC
Form of output voltage	Pure sine
Nominal output current (I_N)	7.8 A (100 V AC)
		8.1 A (110 V AC)
		8.3 A (120 V AC)
		7.7 A (130 V AC)
		5 A (200 V AC)
		4.8 A (210 V AC)
		4.5 A (220 V AC)
		4.3 A (230 V AC)
		4.2 A (240 V AC)
POWER BOOST (I_Boost)	13 A (120 V AC)
POWER BOOST (I_Boost)		7 A (230 V AC)
Output power	778 VA (700 W)
		889 VA (800 W)
		1000 VA (900 W)
		1000 VA (900 W)
		1000 VA (900 W)
		1000 VA (900 W)
		1000 VA (900 W)
		1000 VA (900 W)
		1000 VA (900 W)
Apparent power	1 kVA (U_N  120 V AC)
Nominal power	900 W (U_N  120 V AC)
Maximum no-load power dissipation	typ. 17 W (120 V AC)
Maximum no-load power dissipation		typ. 25 W (230 V AC)
Power loss nominal load max.	typ. 79 W (120 V AC)
Power loss nominal load max.		typ. 55 W (230 V AC)
Crest factor	2.8
Switch-over time	0 ms
Connection in parallel	yes, 2
Connection in series	No
Mains operation
Nominal output voltage	120 V AC ±2 %
Nominal output voltage		230 V AC ±2 %
Nominal output current (I_N)	8.3 A
Nominal output current (I_N)		4.3 A (230 V AC)
POWER BOOST (I_Boost)	13 A
POWER BOOST (I_Boost)		7 A
Battery operation
Nominal output voltage	120 V AC ±2 %
Nominal output voltage		230 V AC ±2 %
Nominal output current (I_N)	4.3 A (230 V AC)
Nominal output current (I_N)		8.3 A (120 V AC)
POWER BOOST (I_Boost)	7 A (230 V AC)
POWER BOOST (I_Boost)		13 A (120 V AC)
Nominal output frequency	± 60 Hz ±0.5 % (At an input frequency of 55 Hz to < 65 Hz)
Nominal output frequency		± 50 Hz ±0.5 % (At an input frequency of 45 Hz to < 55 Hz)
Signal: AC OK
Output voltage	24 V
Continuous load current	≤ 20 mA
Signal: Alarm
Output voltage	24 V
Continuous load current	≤ 20 mA
Signal: Battery mode
Output voltage	24 V
Continuous load current	≤ 20 mA
Signal: Ready
Output voltage	24 V
Continuous load current	≤ 20 mA
Signal: P>P_n
Output voltage	24 V (SELV)
Continuous load current	≤ 20 mA

Nominal voltage U_N	2x 24 V DC
End-of-charge voltage	58 V (temperature compensated)
Charging current	5 A
Nominal capacity range	3.4 Ah ... 190 Ah (5x 38 Ah)
Battery technology	VRLA, VRLA-WTR, LI-ION
Charge characteristic curve	IU₀U
Permissible backup fuse	50 A /  58 V

Input
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	6 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	4 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.	0.25 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.	4 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.	0.25 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.	4 mm²
Conductor cross section AWG min.	30
Conductor cross section AWG max.	10
Stripping length	8 mm
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Output
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	6 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	4 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.	0.25 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.	4 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.	0.25 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.	4 mm²
Conductor cross section AWG min.	30
Conductor cross section AWG max.	10
Stripping length	8 mm
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Signal
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.	0.2 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.	2.5 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.	0.2 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.	2.5 mm²
Conductor cross section AWG min.	30
Conductor cross section AWG max.	12
Stripping length	8 mm
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm

Interface	MINI-USB type B
Features	lockable
Maximum cable length	3 m

Types of signaling	LED
Types of signaling		Active switching output
Signal output: Transistor output, active
Signalization designation	AC OK
Status display	LED
Color	green
Signal output: Transistor output, active
Signalization designation	Alarm
Status display	LED
Color	red
Signal output: Transistor output, active
Signalization designation	Battery mode
Status display	LED
Color	yellow
Signal output: Transistor output, active
Signalization designation	Ready
Signal output: Transistor output, active
Signalization designation	P>P_n
Status display	LED
Color	green
Signal output
Signalization designation	Reference potential for the signal inputs and outputs

Number of phases

1.00

Product type	AC UPS
Product family	QUINT AC-USV
MTBF (IEC 61709, SN 29500)	217546 h (230 V AC, at 40 °C)
Insulation characteristics
Protection class	I
Overvoltage category	II
Pollution degree	3 (≤ 130 V AC)
Pollution degree		2 (> 200 V AC)
Life expectancy (electrolytic capacitors)
Time	68970 h

Width	290 mm
Height	130 mm
Depth	125 mm
Installation dimensions
Installation distance right/left	5 mm / 5 mm
Installation distance top/bottom	50 mm / 50 mm

Mounting type

DIN rail mounting

Housing material	Metal
Hood version	Sheet steel, DIN EN ISO2081 coat - Fe/Zn 18/B/TopCoat transparent blue
Side element version	Aluminum plate, DIN EN 573-3

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 60 °C (> 50 °C: 2,5 % / K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 3000 m (> 2000 m: 0,6 % / 100 m)
Climatic class	3K3 (EN 60721)
Max. permissible relative humidity (operation)	≤ 95 %
Shock	15g in all directions (EN 60068-2-27)
Vibration (operation)	5 Hz ... 100 Hz, 0.7g (EN 60068-2-6)

Uninterruptible power supply systems
Standards/specifications	EN 62040-1

UL
Identification	UL/C-UL Recognized UL 1778

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Interference emission	Noise emission in accordance with EN 62040-2
Noise immunity	Immunity in accordance with EN 62040-2
Noise immunity		Immunity in accordance with EN 61000-6-1 (residential), EN 61000-6-2 (industrial)
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Conducted noise emission	EN 62040-02 (Class C2)
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	± 6 kV
Discharge in air	± 8 kV
Comments	Criterion A
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 6 GHz
Test field strength	10 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	± 2 kV
Input		± 2 kV
Output	± 2 kV
Signal	± 2 kV
Signal		± 2 kV (USB)
Comments	Criterion A (B for USB)
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Signal	1 kV (asymmetrical)
Comments	Criterion A
Input/Output	± 1 kV (symmetrical)
Input/Output		± 2 kV (asymmetrical)
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V
Power frequency magnetic field
Standards/regulations	EN 61000-4-8
Frequency	50 Hz
Frequency		60 Hz
Test field strength	100 A/m
Comments	Criterion A
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.