QUINT4-PS/24DC/24DC/20/SC/+ - DC/DC converters Phoenix Contact

Mã sản phẩm: 1046881

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Primary-switched DC/DC converter, QUINT POWER, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 24 V DC, output: 24 V DC / 20 A

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Nominal input voltage range	24 V DC
Input voltage range	24 V DC -25 % ... +40 %
Wide-range input	no
Electric strength, max.	35 V DC (60 s)
Inrush current	typ. 2.7 A
Inrush current integral (I²t)	< 0.2 A²s
Inrush current limitation	2.7 A (after 1 ms)
Mains buffering time	typ. 16 ms (24 V DC)
Current consumption	27 A (24 V DC)
Typical response time	300 ms (from SLEEP MODE)
Switch-on time	< 1 s
Recommended breaker for input protection	50 A (Characteristic B, C or comparable)
Signal Remote (configurable)
Connection labeling	3.3 +
Function	Output power ON/OFF (remote)
Default	Output power ON (>40 kΩ/24 V DC/open bridge between REM and SGnd)

Efficiency	typ. 94.7 % (24 V DC)
Output characteristic	U/I Advanced
		Smart HICCUP
		FUSE MODE
Nominal output voltage	24 V DC
Setting range of the output voltage (U_Set)	24 V DC ... 28 V DC (> 24 V DC, constant capacity)
Nominal output current (I_N)	20 A
Static Boost (I_Stat.Boost)	25 A
Dynamic Boost (I_Dyn.Boost)	30 A (5 s)
Selective Fuse Breaking (I_SFB)	120 A (15 ms)
Magnetic circuit breaker tripping	A1...A16 / B2...B13 / C1...C6 / Z1...Z16
Short-circuit-proof	yes
No-load proof	yes
Output power (P_N)	480 W
Output power (P_{Stat. Boost})	600 W
Output power (P_{Dyn. Boost})	720 W (5 s)
Feedback voltage resistance	≤ 35 V DC
Protection against overvoltage at the output (OVP)	≤ 30 V DC
Residual ripple	< 50 mV_PP
Control deviation	< 3 % (change in load, static 10 % ... 90 %)
Control deviation	< 3 % (change in load, static 10 % ... 90 %)
Control deviation	< 3 % (change in load, static 10 % ... 90 %)
Rise time	< 100 ms (U_OUT (10 % ... 90 %))
Connection in series	yes
Maximum no-load power dissipation	< 4 W
Power loss nominal load max.	< 26.6 W
Power dissipation SLEEP MODE	< 2 W
Connection in parallel	yes, for redundancy and increased capacity
Signal Out 1 (configurable)
Connection labeling	3.5 +
Digital	0 V DC
		24 V DC
		20 mA
Signal option	Output voltage
		Output current
		Output power
		Operating hours
		Early warning of high temperatures
		OVP voltage limitation active
Default	U_IN input voltage OK
Signal Out 2 (configurable)
Connection labeling	3.6 +
Digital	0 V DC
		24 V DC
		20 mA
Default	Output power
Signal option	Output voltage
		Output current
		Operating hours
		Early warning of high temperatures
		OVP voltage limitation active
Analog	4 mA ... 20 mA ±5 % (Load ≤400 Ω)
Signal option	Output voltage
		Output current
		Output power
Signal relay 13/14 (configurable)
Connection labeling	3.1, 3.2
Switch contact (floating)	floating
Maximum contact load	24 V DC
		1 A
		30 V AC
		0.5 A
Default	Output voltage
Signal option	Output current
		Output power
		Operating hours
		Early warning of high temperatures
		OVP voltage limitation active
		U_IN input voltage OK
Signal ground SGnd
Connection labeling	3.4 +
Function	Signal ground
Reference potential	to OUT1, OUT2, REM

Input
Position	1.x
Conductor connection
Connection method	Screw connection
rigid	0.75 mm² ... 16 mm²
flexible	0.75 mm² ... 16 mm²
flexible with ferrule without plastic sleeve	0.75 mm² ... 16 mm²
flexible with ferrule with plastic sleeve	0.75 mm² ... 16 mm²
rigid (AWG)	20 ... 6
Stripping length	18 mm
Tightening torque	1.4 Nm ... 1.7 Nm
Drive form screw head	Slotted L
Output
Position	2.x
Conductor connection
Connection method	Screw connection
rigid	0.2 mm² ... 6 mm²
flexible	0.2 mm² ... 6 mm²
flexible with ferrule without plastic sleeve	0.2 mm² ... 4 mm²
flexible with ferrule with plastic sleeve	0.2 mm² ... 4 mm²
rigid (AWG)	24 ... 10
Stripping length	10 mm
Tightening torque	0.6 Nm ... 0.8 Nm
Drive form screw head	Slotted L
Signal
Position	3.x
Conductor connection
Connection method	Push-in connection
rigid	0.2 mm² ... 1 mm²
flexible	0.2 mm² ... 1.5 mm²
flexible with ferrule without plastic sleeve	0.2 mm² ... 1.5 mm²
flexible with ferrule with plastic sleeve	0.2 mm² ... 0.75 mm²
rigid (AWG)	24 ... 16
Stripping length	8 mm

Types of signaling	LED
		Floating signal contact
		Active signal output Out1 (digital, configurable)
		Active signal output Out2 (analog, configurable)
		Remote contact
		Signal ground SGnd
Signal threshold	> 100 % (LED lights up yellow, output power > 480 W)
		> 75 % (LED lights up green, output power > 360 W)
		> 50 % (LED lights up green, output power > 240 W)
		> 0.9 x U_Set (LED lights up green)
		< 0.9 x U_Set (LED flashes green)
		> 0.8 x U_InNom (LED off)
		< 0.8 x U_InNom (LED lights up yellow)

Number of phases	1.00
Insulation voltage input/output	4 kV DC (type test)
Insulation voltage input/output		2 kV DC (routine test)
Switching frequency	190 kHz ... 220 kHz (Auxiliary converter stage)
Switching frequency		67 kHz ... 135 kHz (Main converter stage)

Product type	DC/DC converters
Product family	QUINT POWER
MTBF (IEC 61709, SN 29500)	> 1034000 h (25 °C)
		> 577000 h (40 °C)
		> 229000 h (60 °C)
Insulation characteristics
Protection class	Special with SELV input and output
Degree of pollution	2
Life expectancy (electrolytic capacitors)
Current	10 A
Temperature	40 °C
Time	413707 h
Additional text	24 V DC
Life expectancy (electrolytic capacitors)
Current	20 A
Temperature	40 °C
Time	139340 h
Additional text	24 V DC
Life expectancy (electrolytic capacitors)
Current	20 A
Temperature	30 °C
Time	278680 h
Additional text	24 V DC

Width	70 mm
Height	130 mm
Depth	125 mm
Installation dimensions
Installation distance right/left (active)	15 mm / 15 mm
Installation distance right/left (passive)	5 mm / 5 mm
Installation distance top/bottom (active)	50 mm / 50 mm
Installation distance top/bottom (passive)	50 mm / 50 mm
Alternative assembly
Width	122 mm
Height	130 mm
Depth	73 mm

Mounting type	DIN rail mounting
Assembly instructions	alignable: P_N ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically alignable: P_N <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
With protective coating	yes

Flammability rating according to UL 94 (housing / terminal blocks)	V0
Housing material	Metal
Hood version	Stainless steel X6Cr17
Side element version	Aluminum

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 5000 m (> 2000 m, observe derating)
Climatic class	3K22 (in accordance with EN 60721-3-3)
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Shock	18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)	5 Hz ... 100 Hz resonance search 2.3g, 90 min, resonance frequency 2.3g, 90 min

Overvoltage category
EN 61010-1	II (≤ 5000 m)
EN 62477-1	III (≤ 5000 m)
Safety for measurement, control, and laboratory equipment
Standards/specifications	IEC 61010-1
Protective extra-low voltage
Standards/specifications	EN 61010-1 (SELV)
Standards/specifications		IEC 61010-2-201 (PELV)
Explosive atmospheres
Standards/specifications	IEC 60079-0
		IEC 60079-7
		IEC 60079-11
		IEC 60079-15
Mains voltage dips
Standards/specifications	EN 61000-4-29
Railway applications
Standards/specifications	EN 50121-3-2
		EN 50121-4
		IEC 62236-3-2
		IEC 62236-4

UL
Identification	UL Listed UL 61010-1
UL
Identification	UL Listed UL 61010-2-201
UL
Identification	UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
CSA
Identification	CAN/CSA-C22.2 No. 61010-1-12
CSA
Identification	CAN/CSA-IEC 61010-2-201:14
SIQ
Identification	Type tested (type approved)
SIQ
Identification	CB scheme (IEC 61010-1, IEC 61010-2-201)
ATEX
Identification	SIQ 21 ATEX 287 X
		 II 3 G Ex ec ic nC IIC T4 Gc
IECEx
Identification	IECEx SIQ 20.0002X
		Ex ec ic nC IIC T4 Gc
Identification	SIL 2
UKEX
Identification	EXV21UKEX1073X
Shipbuilding
Identification	DNV
Shipbuilding
Identification	ABS
Shipbuilding
Identification	LR
Shipbuilding
Identification	NK

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
EMC requirements for noise emission	EN 61000-6-3
EMC requirements for noise emission		EN 61000-6-4
EMC requirements for noise immunity	EN 61000-6-1
EMC requirements for noise immunity		EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
EMC requirements, power plant	IEC 61850-3
EMC requirements, power plant		EN 61000-6-5
Conducted noise emission	EN 55016
Conducted noise emission		EN 61000-6-3 (Class B)
Noise emission	Additional basic standard EN 61000-6-5 (immunity in power station), IEC/EN 61850-3 (energy supply)
Noise emission	EN 55016
Noise emission		EN 61000-6-3 (Class B)
DNV GL conducted interference	Class B
Additional text	Bridge and deck area
DNV GL noise radiation	Class B
Additional text	Bridge and deck area
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	8 kV (Test Level 4)
Discharge in air	15 kV (Test Level 4)
Comments	Criterion A
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 1 GHz
Test field strength	20 V/m (Test Level 3)
Frequency range	1 GHz ... 6 GHz
Test field strength	10 V/m (Test Level 3)
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	2 kV (Test Level 3 - asymmetrical)
Output	2 kV (Test Level 3 - asymmetrical)
Signal	2 kV (Test Level 4 - asymmetrical)
Comments	Criterion A
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Input	1 kV (Test Level 3 - symmetrical)
Input		2 kV (Test Level 3 - asymmetrical)
Output	1 kV (Test Level 3 - symmetrical)
Output		2 kV (Test Level 3 - asymmetrical)
Signal	2 kV (Test Level 3 - asymmetrical)
Comments	Criterion A
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
I/O/S	asymmetrical
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V (Test Level 3)
Power frequency magnetic field
Standards/regulations	EN 61000-4-8
Frequency	16.7 Hz
		50 Hz
		60 Hz
Test field strength	100 A/m
Additional text	60 s
Comments	Criterion A
Frequency	50 Hz
Frequency		60 Hz
Frequency range	50 Hz ... 60 Hz
Test field strength	1 kA/m
Additional text	3 s
Comments	Criterion A
Frequency	0 Hz
Test field strength	300 A/m
Additional text	DC, 60 s
Comments	Criterion A
Voltage dips
Standards/regulations	EN 61000-4-29
Voltage	24 V DC
Voltage dip	70 %
Time	100 ms
Additional text	Test Level 2
Comments	Criterion A
Voltage dip	40 %
Time	100 ms
Additional text	Test Level 2
Comments	Criterion B
Voltage dip	0 %
Time	50 ms
Additional text	Test Level 2
Comments	Criterion B
Pulse-shape magnetic field
Standards/regulations	EN 61000-4-9
Test field strength	1000 A/m
Comments	Criterion A
Asymmetrical conducted disturbance variables
Standards/regulations	EN 61000-4-16
Test level 1	15 Hz 150 Hz (Test Level 3)
Voltage	10 V 1 V
Test level 2	150 Hz 1.5 kHz (Test Level 3)
Voltage	1 V
Test level 3	1.5 kHz 15 kHz (Test Level 3)
Voltage	1 V 10 V
Test level 4	15 kHz 150 kHz (Test Level 3)
Voltage	10 V
Test level 5	16.7 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 3)
Voltage	10 V (Permanent)
Test level 6	0 Hz 16.7 Hz 50 Hz 60 Hz (Test Level 3)
Voltage	100 V (1 s)
Comments	Criterion A
Alternating component of direct voltage
Standards/regulations	EN 61000-4-17
Alternating component	10 % (U_N)
Frequency	50 Hz
		100 Hz
		150 Hz
Comments	Criterion A
Alternating component	10 % (U_N)
Frequency	300 Hz
Comments	Criterion A
Attenuated oscillating wave
Standards/regulations	EN 61000-4-18
Input, output (test level 1)	1 MHz (Test Level 2 - symmetrical)
Voltage	0.5 kV
Input, output (test level 2)	1 MHz (Test Level 2 - asymmetrical)
Voltage	1 kV
Input, output (test level 3)	10 MHz (Test Level 2 - asymmetrical)
Voltage	0.5 kV
Signals (test level 1)	1 MHz (Test Level 2 - symmetrical)
Voltage	0.5 kV
Signals (test level 2)	1 MHz (Test Level 2 - asymmetrical)
Voltage	1 kV
Comments	Criterion A
Attenuated oscillating magnetic field
Standards/regulations	EN 61000-4-10
Test field strength	100 A/m
Test level 1	100 kHz
Test field strength	100 A/m
Test level 2	1 MHz
Comments	Criterion A
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.
Criterion C	Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.