QUINT4-ORING/12-24DC/2X10/2X10 - Redundancy module Phoenix Contact

Mã sản phẩm: 1088206

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

Active redundancy module QUINT ORING with decoupling MOSFET, ACB Technology, DIN rail mounting, 12 V DC ... 24 V DC, 2x 10 A, 2x 10 A

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Nominal input voltage range	12 V DC ... 24 V DC
Input voltage range	8 V DC ... 29.5 V DC
Voltage type of supply voltage	DC
Nominal input current (I_N)	2x 10 A
Static Boost (I_Stat.Boost)	2x 12.5 A
Dynamic Boost (I_Dyn.Boost)	2x 20 A (5 s)
Selective Fuse Breaking (I_SFB)	2x 60 A (15 ms)
Reverse polarity protection	< yes60 V DC
Intended listed circuit breaker for input protection	60 V DC
Intended listed circuit breaker for input protection		16 A (Characteristic B, C)
Voltage drop, input/output	typ. 0.1 V (I_OUT = 10 A)

Efficiency	typ. 98.5 % (12 V DC)
Efficiency		typ. 99 % (24 V DC)
Nominal output voltage	U_In - 0.1 V
Output voltage	U_In-
Nominal output current (I_N)	2x 10 A
Nominal output current (I_N)		1x 20 A
Static Boost (I_Stat.Boost)	2x 12.5 A
Static Boost (I_Stat.Boost)		1x 25 A
Dynamic Boost (I_Dyn.Boost)	2x 20 A (5 s)
Dynamic Boost (I_Dyn.Boost)		1x 40 A (5 s)
Selective Fuse Breaking (I_SFB)	2x 60 A (15 ms)
Selective Fuse Breaking (I_SFB)		1x 120 A (15 ms)
Connection in series	No
Feedback voltage resistance	≤ 32 V DC
Protection against overvoltage at the output (OVP)	< 32 V DC
Power loss nominal load max.	4.08 W (I_OUT = 40 A)
Power loss nominal load max.		4.25 W (I_OUT = 20 A)
Signal relay 13/14
Connection labeling	3.1, 3.2
Switch contact (floating)	floating
Maximum contact load	30 V DC
Maximum contact load		100 mA
Signal option	Redundancy OK
Signal relay 23/24
Connection labeling	3.3, 3.4
Switch contact (floating)	floating
Maximum contact load	30 V DC
Maximum contact load		100 mA
Signal option	ACB OK

Input
Position	1.x
Conductor connection
Connection method	Screw connection
rigid	0.2 mm² ... 6 mm²
flexible	0.2 mm² ... 4 mm²
flexible with ferrule without plastic sleeve	0.25 mm² ... 4 mm²
flexible with ferrule with plastic sleeve	0.25 mm² ... 4 mm²
rigid (AWG)	24 ... 10
Stripping length	8 mm
Tightening torque	0.5 Nm ... 0.6 Nm
Drive form screw head	Slotted L
Output
Position	2.x
Conductor connection
Connection method	Screw connection
rigid	0.2 mm² ... 6 mm²
flexible	0.2 mm² ... 4 mm²
flexible with ferrule without plastic sleeve	0.25 mm² ... 4 mm²
flexible with ferrule with plastic sleeve	0.25 mm² ... 4 mm²
rigid (AWG)	24 ... 10
Stripping length	8 mm
Tightening torque	0.5 Nm ... 0.6 Nm
Drive form screw head	Slotted L
Signal
Position	3.x
Conductor connection
Connection method	Push-in connection
rigid	0.2 mm² ... 1 mm²
flexible	0.2 mm² ... 1.5 mm²
flexible with ferrule without plastic sleeve	0.2 mm² ... 1.5 mm²
flexible with ferrule with plastic sleeve	0.2 mm² ... 0.75 mm²
rigid (AWG)	24 ... 16
Stripping length	8 mm

Types of signaling	DC OK (green)
Signal threshold	Redundancy OK (LED lights up green)
		I < I_n (LED lights up green)
		ACB OK (LED lights up green)
		ACB OK (sources are slightly asymmetrical) (LED lights up green and yellow)
		Sources are asymmetrical (LED flashing red)

Insulation voltage input, output / housing	600 V AC
Insulation voltage input, output / housing		850 V DC

Product type	Redundancy module
Product family	QUINT ORING
MTBF (IEC 61709, SN 29500)	> 2101000 h (25 °C)
		> 1247000 h (40 °C)
		> 599000 h (60 °C)
Environmental protection directive	RoHS Directive 2011/65/EU
		WEEE
		Reach
LED	yes
Insulation characteristics
Protection class	III
Degree of pollution	2
Life expectancy (electrolytic capacitors)
Current	20 A
Temperature	40 °C
Time	295000 h
Additional text	12 V DC
Life expectancy (electrolytic capacitors)
Current	20 A
Temperature	40 °C
Time	240000 h
Additional text	24 V DC

Dimensional drawing
Width	39 mm
Height	130 mm
Depth	132 mm
Depth Device depth (DIN rail mounting)	125 mm (Device depth (DIN rail mounting))
Installation dimensions
Installation distance right/left	5 mm / 5 mm
Installation distance top/bottom	50 mm / 50 mm
Alternative assembly
Width	122 mm
Height	130 mm
Depth	36 mm

Mounting type	DIN rail mounting
Assembly instructions	alignable: P_N ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically alignable: P_N <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Mounting position	horizontal DIN rail NS 35, EN 60715

Flammability rating according to UL 94 (housing / terminal blocks)	V0
Housing material	Metal
Type of housing	Aluminum (AlMg3)
Hood version	Galvanized sheet steel, free from chrome (VI)
Side element version	Aluminum

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	5000 m
Max. permissible relative humidity (operation)	≤ 100 % (at 25 °C, non-condensing)
Shock (operation)	18 ms, 30g, per spatial direction (IEC 60068-2-27)
Vibration (operation)	< 15 Hz, amplitude ±2.5 mm (IEC 60068-2-6)
Vibration (operation)		15 Hz ... 150 Hz, 2.3g, 90 min.

Electrical safety
Standards/specifications	IEC 61010-1
Protective extra-low voltage
Standards/specifications	EN 61010-1 (SELV)
Protective extra-low voltage
Standards/specifications	IEC 61010-2-201 (PELV)

Shipbuilding
Identification	DNV
UL
Identification	UL Listed UL 61010-1
UL
Identification	UL Listed UL 61010-2-201
UL
Identification	UL 121201 & CSA C22.2 No. 213-17 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
CSA
Identification	CAN/CSA-C22.2 No. 61010-1-12
Identification	CAN/CSA C22.2 No. 61010-2-201:18
ATEX
Identification	 II 3 G Ex ec nC IIC T4 Gc
		DEKRA 22ATEX0104 X
IECEx
Identification	Ex ec nC IIC T4 Gc
		IECEx DEK 22.0089X
UKEX
Identification	 II 3 G Ex ec nC IIC T4 Gc
		DEKRA 22UKEX6029X

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
EMC requirements for noise emission	EN 61000-6-3
EMC requirements for noise emission		EN 61000-6-4
EMC requirements for noise immunity	EN 61000-6-1
EMC requirements for noise immunity		EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Conducted noise emission	EN 55016
Conducted noise emission		EN 61000-6-3 (Class B)
Noise emission	Additional basic standard EN 61000-6-5 (immunity in power station)
Noise emission	EN 55016
Noise emission		EN 61000-6-3 (Class B)
DNV GL conducted interference	Class B
Additional text	Bridge and deck area
DNV GL noise radiation	Class B
Additional text	Bridge and deck area
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	6 kV (Test Level 3)
Discharge in air	8 kV (Test Level 3)
Comments	Criterion B
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 1 GHz
Test field strength	20 V/m (Test Level 3)
Frequency range	1 GHz ... 6 GHz
Test field strength	10 V/m (Test Level 3)
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	2 kV (Test Level 3 - asymmetrical)
Output	2 kV (Test Level 3 - asymmetrical)
Signal	2 kV (Test Level 4 - asymmetrical)
Comments	Criterion A
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Input	0.5 kV (Test Level 2 - symmetrical)
Input		1 kV (Test Level 2 - asymmetrical)
Output	0.5 kV (Test Level 2 - symmetrical)
Output		1 kV (Test Level 2 - asymmetrical)
Comments	Criterion A
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
I/O/S	asymmetrical
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V (Test Level 3)
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.