QUINT4-CAP/24DC/3.8/1KJ/PT - Capacity module Phoenix Contact

Mã sản phẩm: 2320526

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

QUINT capacity module with maintenance-free double-layer capacitor-based energy storage for DIN rail mounting, input: 24 V DC, output: 24 V DC / 3.8 A / 1 kJ

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Product type	DC UPS with integrated capacitor
Product family	QUINT capacity module
MTBF (IEC 61709, SN 29500)	996550 h (40 °C)
		1631804 h (25 °C)
		449865 h (60 °C)
Insulation characteristics
Protection class	III
Overvoltage category	II
Degree of pollution	2

Insulation voltage input, output / housing

500 V

Input voltage	24 V DC (SELV)
Input voltage range	22.5 V DC ... 30 V DC
Fixed backup threshold	< 22 V DC
Current consumption I_max (U_N, I_OUT = I_Stat.Boost, I_{charge = max})	4.3 A
Current consumption I_No-Load(U_N, I_OUT = 0, I_charge = 0)	0.08 A
Current consumption I_charge (U_N, I_OUT = 0, I_charge = max)	0.43 A
Buffer time	9 s (3.8 A)
Buffer time		30 s (1 A)
Charging time	4 min. (0.43 A)
Recharging time	3 min. (0.43 A)
Signal state Remote
Connection labeling	3.3
State (configurable)	Remote
State condition	Remote

Efficiency	> 97 % (with charged energy storage device)
Connection in parallel	yes
Connection in parallel		max. 2 (with decoupling module)
Connection in series	No
Mains operation
Output voltage	24 V DC (depending on the input voltage)
Output current I_N	3.8 A
Output power P_OUT (U_N, I_OUT = I_N)	91.2 W
Maximum no-load power dissipation	< 2 W
Battery operation
Output voltage	24 V DC
Output current I_N	3.8 A
Signal state Ready
Connection labeling	3.2
Switching output	Transistor output, active
State (configurable)	Ready
State condition (configurable)	State of charge = 100% or buffer mode
Output voltage	24 V (U_N - 1 V (typical))
Output can be loaded	20 mA
Signal state UIN OK
Connection labeling	3.1
Switching output	Transistor output, active
State (configurable)	U_In OK
Output voltage	24 V (U_N - 1 V (typical))
Output can be loaded	20 mA
LED status indicator	green (U_In OK)
Signal threshold	Input voltage in the valid range
Signal ground SGnd
Connection labeling	3.4
Function	Signal ground
Reference potential	U_In OK (3.1), Ready (3.2), Remote (3.3)

Capacity	1 kJ
Buffer time	9 s (3.8 A)
Buffer time		30 s (1 A)
Storage medium	Double-layer capacitor

Width	85 mm
Height	102.5 mm
Depth	90 mm
Installation dimensions
Installation distance right/left	0 mm / 0 mm
Installation distance top/bottom	50 mm / 50 mm

Housing material

Plastic

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 60 °C
Ambient temperature (start-up type tested)	-40 °C
Maximum altitude	≤ 4000 m
Climatic class	3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)	≤ 95 %

UL
Identification	UL Listed UL 61010-1
UL
Identification	UL Listed UL 61010-2-201
UL
Identification	UL 121201
CSA
Identification	CSA C22.2 No. 223 class 2 (buffer mode)
CSA
Identification	CAN/CSA-C22.2 No. 61010-1-12
CSA
Identification	CAN/CSA C22.2 No. 61010-2-201:14
CSA
Identification	CSA C22.2 No. 213-17
UL NEC
Identification	UL 1310 class 2 (buffer mode)
CB scheme
Identification	IEC 61010-1
		IEC 61010-2-201
		EN 61010-1
		EN 61010-2-201

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Noise emission	EN 61000-6-3
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	6 kV (Test Level 3)
Discharge in air	8 kV (Test Level 3)
Comments	Criterion B
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 6 GHz
Test field strength	10 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	2 kV (Test Level 3 - asymmetrical)
Output	2 kV (Test Level 3 - asymmetrical)
Signal	2 kV (Test Level 4 - asymmetrical)
Comments	Criterion B
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Input	1 kV (Test Level 3 - symmetrical)
Input		2 kV (Test Level 3 - asymmetrical)
Output	1 kV (Test Level 3 - symmetrical)
Output		2 kV (Test Level 3 - asymmetrical)
Signal	1 kV (Test Level 1 - asymmetrical)
Comments	Criterion B
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.