QUINT4-BUFFER/24DC/40 - Buffer module Phoenix Contact

Mã sản phẩm: 2908283

Danh mục: PHOENIX CONTACT, Supply, charge, and protect Phoenix Contact,

QUINT buffer module with maintenance-free capacitor-based energy storage for DIN rail mounting, input: 24 V DC, output: 24 V DC/40 A, including mounted UTA 107 universal DIN rail adapter.

Liên hệ mua hàng

Hãng sản xuất: PHOENIX CONTACT

Chất lượng: Mới 100%

Bảo hành: Chính hãng

Chứng từ: CO/CQ, hóa đơn VAT

Liên hệ(SĐT/Zalo): 0933612627

Mô tả

Input voltage range	22.5 V DC ... 30 V DC
Fixed backup threshold	< 22 V DC
Voltage type of supply voltage	DC
Current consumption I_max (U_N, I_OUT = I_Stat.Boost, I_{charge = max})	46 A (max.)
Current consumption I_No-Load(U_N, I_OUT = 0, I_charge = 0)	0.2 A (No-load)
Current consumption I_charge (U_N, I_OUT = 0, I_charge = max)	0.8 A (charging process)
Buffer time	0.2 s (40 A)
Buffer time		2 s (4 A)

Efficiency	> 98 % (with charged energy storage device)
Connection in parallel	no
Connection in series	No
Mains operation
Output voltage	24 V DC (depending on the input voltage)
Output current I_N	40 A
Static Boost (I_Stat.Boost)	45 A (15 ms)
Dynamic Boost (I_Dyn.Boost)	60 A (5 s)
Power loss nominal load max.	< 9 W
Buffer mode
Output voltage	typ. 22 V DC
Output current I_N	40 A (depending on output current)
Static Boost (I_Stat.Boost)	45 A
Signal state Ready
Connection labeling	3.3
Switching output	Transistor output, active
State (configurable)	Ready
State condition (configurable)	State of charge = 100% or buffer mode
Output voltage	24 V (U_N - 2 V (typical))
Output can be loaded	20 mA
Signal state UIN OK
Connection labeling	3.1, 3.2
Switching output	Electronic relays (OptoMOS)
State (configurable)	U_In OK
Output voltage	30 V DC
Output can be loaded	200 mA
LED status indicator	green (U_In OK)
Signal threshold	Input voltage in the valid range
Signal ground SGnd
Connection labeling	3.4
Function	Signal ground
Reference potential	3.3 Ready

Nominal capacity	2 mAh
IQ-Technology	no

Insulation voltage input, output / housing

500 V

Product type	Buffer module
Product family	QUINT BUFFER
MTBF (IEC 61709, SN 29500)	2813895 h (40 °C)
Insulation characteristics
Protection class	Special application (SELV input voltage, hazardous voltages are generated in the device).
Overvoltage category	I
Degree of pollution	2
Life expectancy (electrolytic capacitors)
Time	71660 h

Width	72 mm
Height	130 mm
Depth	125 mm
Installation dimensions
Installation distance right/left	0 mm / 0 mm
Installation distance top/bottom	50 mm / 50 mm

Assembly instructions	alignable: horizontally 0 mm, vertically 50 mm
Mounting position	horizontal DIN rail NS 35, EN 60715

Housing material

Metal

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (> 40 °C Derating: 0.56 %/K / > 60 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Ambient temperature (start-up type tested)	-40 °C
Maximum altitude	≤ 4000 m
Climatic class	3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)	≤ 95 %

Electrical safety
Standards/specifications	IEC 60950-1/VDE 0805 (SELV)

UL
Identification	UL Listed UL 508
UL
Identification	UL/C-UL Recognized UL 60950-1

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
EMC requirements for noise emission	EN 61000-6-3
EMC requirements for noise emission		EN 61000-6-4
EMC requirements for noise immunity	EN 61000-6-1
EMC requirements for noise immunity		EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Noise emission	EN 55016
Noise emission		EN 61000-6-3
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	6 kV (Test Level 3)
Discharge in air	8 kV (Test Level 3)
Comments	Criterion A
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 6 GHz
Test field strength	10 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	2 kV (Test Level 3 - asymmetrical)
Output	2 kV (Test Level 3 - asymmetrical)
Signal	2 kV (Test Level 3 - asymmetrical)
Comments	Criterion A
Surge voltage load (surge)
Input	1 kV (Test Level 2 - symmetrical)
Input		2 kV (Test Level 3 - asymmetrical)
Output	1 kV (Test Level 2 - symmetrical)
Output		2 kV (Test Level 3 - asymmetrical)
Signal	1 kV (Test Level 2 - asymmetrical)
Comments	Criterion A
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.